Hello,
It would be really great if everyone here could just post one or a few pictures showing the current state of their house.
I'll start right away.
For renovations, it’s best to provide a comparison of before and after the remodeling.
Before March 2014:
After May 2015:
It would be really great if everyone here could just post one or a few pictures showing the current state of their house.
I'll start right away.
For renovations, it’s best to provide a comparison of before and after the remodeling.
Before March 2014:
After May 2015:
Schimi179126 Mar 2021 08:02benediktr schrieb:
The screed is being installed tomorrow. The heating system is ready to go except for connecting the power supply.
[ATTACH alt="haus-bilderthread-zeigt-her-eure-hausbilder-483300-1.JPG"]59292[/ATTACH]
[ATTACH alt="haus-bilderthread-zeigt-her-eure-hausbilder-483300-2.JPG"]59293[/ATTACH]
It’s definitely going to be warm in your place 🙂benediktr schrieb:
The screed is being installed tomorrow. The heating system is ready to go, except for the electricity.
[ATTACH alt="haus-bilderthread-zeigt-her-eure-hausbilder-483300-2.JPG"]59293[/ATTACH]
How did you manage to make those extremely tight loops in the center of the pipe coil? As a layperson, isn’t that a bit too sharply bent? 🙄
B
benediktr29 Mar 2021 19:57As mentioned, the screed was poured on Friday. It’s starting to feel like a home now.
B
benediktr29 Mar 2021 20:19annab377 schrieb:
How did you manage to make such extremely tight loops in the middle of the pipe coil? Isn’t that maybe a bit too sharply bent for me as a layperson?If you know the bending point of the pipe, something like this is possible 🙂
tomtom79 schrieb:
Very nice installation spacing when an air-to-water heat pump is used as the heat source—look forward to the low flow temperature.Yes, the whole system is heated/cooled by a Wolf CHA-07. I’m familiar with the topic and curious how low I can get the flow temperature.
Similar topics