ᐅ Building an End-Terrace House as a Self-Managed Project with a General Contractor

Created on: 27 May 2019 10:48
G
goalkeeper
Hello everyone,

some of you might have already followed one of my threads about us having to or being allowed to build our end-terrace house on our own responsibility – depending on how you look at it. This means that we are buying an end-terrace plot (215 sqm (2315 sq ft)) in a new development area in the Rhein-Neckar district and will be building on it ourselves – but in coordination with our two terrace neighbors.

The municipality, which sold the plots through a local resident model, ideally wanted applicants to apply as a complete housing group with several families and then build accordingly with a general contractor, construction manager, or architect. Of course, that didn’t really work out, so now there are only individual applicants and also homeowners.

After we were awarded the plot, the addresses of the other terrace neighbors were shared to discuss certain matters, such as roof style, whether or not to have a basement, etc. It was immediately clear that everyone preferred to do their own thing. However, we were still able to agree that the housing group will have a gable roof with a pitch of 35 to 40 degrees (within this 5-degree range).

As the end house, we will build without a basement, while the middle house and the other end house will have basements. This obviously presents a challenge as we would have to make a deep foundation or simply skip it, and the middle house would have to support us, as we will start construction first. The current agreement with the middle house is that we will build a deeper foundation at his expense, as supporting our house later on would be considerably more expensive for him.

We are currently close to signing with the construction manager, the notarization appointment for the plot is at the end of June, and we hope to start construction in the fall of this year. Meanwhile, several other freely planned housing groups are being built around us, which might get in the way with their cranes.

I will document the progress here from time to time – such a self-planned terraced house doesn’t come along very often.
tomtom7913 Sep 2020 10:08
Install a panel above the Pax, and the wardrobe will look like it was custom-made by a carpenter.
S
Scout
13 Sep 2020 11:20
Cool feature, the ventilation flap. I would also stick self-adhesive mirrors exactly to fit on it. That way, everything appears more spacious, and a mirror there is simply practical anyway.
S
Scout
13 Sep 2020 11:37
Are you leaving the Pax open? In that case, the 5mm (0.2 inches) cover caps from Hettich might also be worth considering—they allow you to make the unused holes for the shelf supports relatively "invisible."
H
hanse987
13 Sep 2020 11:39
goalkeeper schrieb:

We were only connected to Gladfaser two weeks ago (after a 12-week delay). So for now, functionality takes priority.

The network cables and the patch panel must have been installed by the electrician quite some time ago. There is simply no slack left for a neat cable arrangement. Hanging network cables like that are not acceptable to me at all. The rest can be sorted out sometime later.
G
goalkeeper
13 Sep 2020 11:47
As I said, a friend of mine is an electrician and he will properly rewire everything.

The electrician from the general contractor didn’t really prioritize it.
M
Martial.white
13 Sep 2020 13:56
I don't really mind. The door is there to look good ...