ᐅ How can I securely mount Ikea Metod cabinets to concrete walls?

Hello everyone,

I am currently planning to securely mount Ikea Metod kitchen cabinets on a solid concrete wall. It is important to me that the cabinets remain stable and firmly fixed over time, without cracks or loosening in the wall or the fasteners themselves.

The wall is a load-bearing concrete wall, not a drywall or similar, so it is quite solid and without cavities.

My questions are:
- Which types of anchors are recommended here to ensure maximum load capacity?
- Do I need special screws, or are the regular Metod screws from Ikea sufficient?
- Is there an optimal spacing or arrangement of the fastening points that you would recommend?
- How should I proceed if I hang several heavy cabinets side by side to distribute the load evenly?

I have also read that some cordless drills or hammer drills work better in this situation. What should be considered?

Could you please share your experiences or recommendations for securely installing Metod cabinets on concrete walls? Thank you in advance!

Use heavy-duty metal anchors, as they are the most stable for concrete. You can use the Ikea screws, they will hold if the anchor fits correctly. The screw spacing should be about 50-60 cm (20-24 inches). Use a hammer drill with the appropriate drill bit, and it will work well.

Hey, it’s great that you’re approaching this topic so thoroughly! 😊 For concrete walls, I personally recommend the Fischer SX anchors—they hold really well, especially when the cabinets are heavily loaded. And yes, metal screws combined with these anchors provide excellent security!

Remember: better to use more anchors than too few, as this gives you peace of mind and distributes the weight more effectively. A cordless drill with a hammer function is essential for concrete; otherwise, you’ll be drilling forever 😅

Good luck with the installation, you’ll do great!

What I find missing in this whole discussion is: how certain can we be that the wall itself is truly intact enough to bear this load permanently?

zardi schrieb:
Use heavy-duty metal anchors, they are the most stable for concrete.

Of course, metal heavy-duty anchors are good, but not all concrete is the same quality. If there are cracks or small spalls, that needs to be taken into account.

It would also be interesting if anyone has experience with how the material behaves over the years, for example, if the cabinets are regularly loaded or moved. Focusing only on anchors and screws seems too narrow to me.

And @eniix: What exactly do you want to hang, just regular kitchen cabinets or also appliances or heavy items? That makes quite a difference.

Tause schrieb:
And @eniix: What exactly do you want to hang—just regular kitchen cabinets or also appliances or heavy items?

Thanks for the clarification! These are standard Metod wall cabinets, mostly without appliances, but some are fully loaded spice and pantry cabinets, so they do carry significant weight. That’s why even load distribution is important to me. Other appliances like the oven or dishwasher are installed separately and do not contribute to the load here.

From a technical perspective, I recommend the following procedure:

- Use high-quality metal expansion anchors or bolt anchors specifically tested for concrete.
- Pay attention to the diameter of the anchors, at least 8 mm (0.3 inches) to ensure sufficient load capacity.
- Use stainless steel or galvanized steel screws with appropriate length (at least 60 mm (2.4 inches) embedded in the anchor).
- Pre-drill the hole with a hammer drill and SDS-Plus drill bit for concrete, removing dust thoroughly.
- Use mounting points both at the screw holes of the cabinet mounting bracket and within the cabinet's distribution grid (approximately 50 cm (20 inches) spacing).

When distributing the load, attach multiple cabinets to a hanging rail or at least use screw points on both side panels of the cabinet.

Set anchors according to the manufacturer's instructions and avoid overloading.