ᐅ Which paints and finishes are suitable for painting IKEA Besta furniture?
Created on: 4 Feb 2020 09:37
R
Ra-ra
Hello everyone,
I am planning to paint my IKEA Besta furniture myself and want to achieve a durable, well-covering, and naturally aesthetically pleasing surface. However, I know that IKEA materials are often melamine-coated or covered with laminate foil, which can make painting more challenging. My question is: which paints and coatings work best for painting IKEA Besta furniture, both in terms of adhesion and longevity?
I am especially interested in product recommendations (e.g., acrylic paint, 2-component paint) and preparation tips, as I want to properly sand and prime the surfaces. If anyone has experience with different finishes like satin matte or high gloss, I would appreciate your insights.
Looking forward to your tips and experiences!
I am planning to paint my IKEA Besta furniture myself and want to achieve a durable, well-covering, and naturally aesthetically pleasing surface. However, I know that IKEA materials are often melamine-coated or covered with laminate foil, which can make painting more challenging. My question is: which paints and coatings work best for painting IKEA Besta furniture, both in terms of adhesion and longevity?
I am especially interested in product recommendations (e.g., acrylic paint, 2-component paint) and preparation tips, as I want to properly sand and prime the surfaces. If anyone has experience with different finishes like satin matte or high gloss, I would appreciate your insights.
Looking forward to your tips and experiences!
Super exciting question! I love upgrading DIY furniture pieces, especially Besta. For painting, I always use 2K polyurethane lacquer because it provides the ultimate protection. I’ve also found that with the right preparation (sanding multiple times with 240-grit sandpaper + special bonding primer), the results really stand out!
And hey, it’s also a lot of fun to customize your furniture. Good luck to all the "paint heroes" out there!
And hey, it’s also a lot of fun to customize your furniture. Good luck to all the "paint heroes" out there!
bauku schrieb:
For painting, I always use 2K PUR paint because it simply provides the ultimate protection.Thank you for the feedback so far! It confirms my assumption that 2K paint is the preferred choice. What still confuses me a bit: How does it work with the different Besta finishes? Some have a foil coating, others melamine. Do you need different primers for these?
Also, it would be interesting to know if anyone is familiar with low-odor options – I plan to work in a room with limited ventilation.
Ra-ra schrieb:
What about the different Besta finishes? Some have a foil coating, others melamine. Do you need different primers for these?Indeed, the coatings vary, which affects adhesion. For foil coatings, a primer designed specifically for smooth, non-porous surfaces is recommended.
For melamine coatings, a primer is also necessary, but products with stronger adhesion might be required.
When in doubt, manufacturers usually provide product information explicitly suited for plastic-coated surfaces. So, differences in primer choice should be considered, but generally, a high-quality universal primer can cover many surfaces.
Ra-ra schrieb:
Also, I’d be interested to know if anyone is aware of low-odor optionsLow-odor two-component (2K) coatings are rare because the hardener usually causes the smell. For interior use, I recommend acrylic paints, which have a less intense odor but are still durable.
I can fully understand how challenging it is to find the right color and suitable paint for Besta furniture. Especially when you put a lot of time and heart into a project, you don’t want to be disappointed by the durability or appearance.
Therefore, my advice is to test different combinations of sanding, priming, and painting in an inconspicuous area. This way, you can see for yourself what looks best and how well the paint adheres. Surprises can happen both ways.
And please don’t get discouraged if something doesn’t go perfectly the first time. You learn with every project!
Therefore, my advice is to test different combinations of sanding, priming, and painting in an inconspicuous area. This way, you can see for yourself what looks best and how well the paint adheres. Surprises can happen both ways.
And please don’t get discouraged if something doesn’t go perfectly the first time. You learn with every project!
Similar topics