Hello everyone, I am planning to buy the Pax system from Ikea for my wardrobe and am particularly interested in the durability and sturdiness of these cabinets under normal daily use. My specific question is: How long does an Ikea Pax wardrobe typically last when used by one person on average, with regular storage of clothes, shoes, and accessories, but without special stresses like moving or frequent disassembly? Are there any experience-based insights regarding the average lifespan, material quality, and how well the hinges and drawers continue to function after several years of use? I look forward to your assessments, especially from those who have been using a Pax system for many years.
[@Muaxel50] Your question is very relevant and well put, as the lifespan depends on several factors: material quality, usage, and installation. Based on my own experience, I would say that if the wardrobe is assembled correctly and not overloaded, a Pax can easily last 7-10 years. It is also important not to put too much strain on the doors and drawers, as this can cause the hinges to wear out more quickly. Do you have specific models or interior fittings in mind? This would help in better estimating the durability of the different options.
A Pax is like a good friend: if you take care of it and treat it with respect, it will last a long time and work reliably 😄. So yes, with normal use, I think 8 years is a realistic expectation. And if you want to move the wardrobe at some point – just be careful, and it will work out perfectly!
Thank you for the initial assessments. Johnathon, to answer your question: I am planning a standard Pax wardrobe with a depth of about 50 cm (20 inches) and a width between 100 and 150 cm (39 to 59 inches), featuring some drawers and shelves. It will not be subjected to very heavy loads but mainly used for hanging clothes and storing folded shirts. I want to ensure that the doors and drawers continue to close properly after several years without significant warping. Are there any particular construction details I should be aware of? Are there any potential weak points in the 50 cm (20 inches) deep model that I should know about?
E
edisondan13 Jun 2016 12:35Johnathon schrieb:
The carcasses are usually made from melamine-coated particle boards, which can last several years if handled properly. That’s correct, this construction method is both sturdy and cost-efficient. It is important during assembly to avoid putting too much weight on the boards or exposing them to moisture.
Muaxel50 schrieb:
I want the doors and drawers to still close well after several years and show no significant warping. For that, I recommend precisely aligning the hinges during installation and checking the drawer slides. The 50cm (20 inches) deep model is generally durable; problems usually occur due to overloading or poor assembly. If you regularly inspect the fittings, the cabinet can easily last over ten years.
Muaxel50 schrieb:
Are there any special considerations I should keep in mind during assembly? Are there any potential weak points with the 50 cm (20 inches) deep model that I should be aware of? When assembling a Pax, it is particularly advisable to:
- Check all parts for completeness and any damage before starting assembly.
- Tighten screws with the appropriate tool, making sure not to overtighten.
- Install the wall fixture correctly, as the stability depends significantly on this.
- Distribute the weight evenly and store heavier items lower down.
There are no specific weak points for the 50 cm (20 inches) deep model beyond the usual connection points and drawer runners. If the drawers are frequently fully loaded, the rollers may wear out faster.
Similar topics