ᐅ Is it normal for Ikea Hemnes furniture to creak or squeak during assembly?

Hello everyone, I recently assembled an Ikea Hemnes wardrobe and noticed that the doors sometimes creak or squeak slightly when moved. I’m wondering if this noise is normal for the Hemnes model or if it might indicate loose installation, insufficient lubrication, or possibly material issues. Has anyone else experienced something similar with the Hemnes? If so, how did you resolve the problem? Are there any specific tips for assembly or maintenance to reduce the noises? Thanks in advance for your feedback!

Squeaking or creaking is not normal with Hemnes; it is usually caused by loose screws or insufficient lubrication. Simply tighten all connections again and lightly apply silicone grease or cooking oil to the hinges.

Hello ineslu, creaking in Hemnes furniture can have several causes. It is usually caused by slight movements between wood panels or metal hinges. It is important to first check all screws and dowels and tighten them again if necessary. Additionally, applying some wax or a special lubricant to the hinge points can help reduce the issue. Ikea furniture is made from a combination of MDF and solid wood, so it can react to changes in humidity – this can also promote temporary creaking. If you continue to hear the noise after some time, contacting customer service might be a good idea.

The material combination used in Ikea Hemnes furniture can actually cause mechanical friction, especially if the assembly is not done precisely. Squeaking and creaking noises often occur at the hinges or at contact points between wooden parts when these are slightly misaligned or not properly secured. It is recommended to tighten the screws sequentially using a torque wrench to ensure even tension. Additionally, there are special furniture waxes or PTFE sprays that act as lubricants and can reduce these noises over the long term. Another factor is the environment: wood reacts to humidity. Severe dryness or fluctuations in moisture levels can cause temporary creaking. From a technical perspective, moderate creaking is not unusual; if it occurs after assembly, it should decrease over time.

If the noise is annoying, tighten the screws and lubricate the hinges. If that doesn't help, contact Ikea or replace the parts.

pikin schrieb:
Wood reacts to humidity. Strong dryness or fluctuations in moisture can cause temporary squeaking.

That makes sense to me, thanks for the tip! I actually live in a very dry apartment with heating air. Do you think regular, controlled humidity would be better, or would that just postpone the problem? I’ve also considered removing the hinges completely and lubricating them again, but I’m worried about affecting the assembly quality. Are there any TÜV- or Ikea-certified procedures for assembling Hemnes that should be followed to avoid losing warranty claims?