M
marv_502312 Jul 2012 17:49Hello everyone,
A brief background...
A few years ago, we were gifted a Malm bed measuring 160 x 220 cm (63 x 87 inches).
Now we have separated, and I ordered a 140 x 220 cm (55 x 87 inches) mattress for my new bed and would like to buy a MALM bed again.
I am aware that IKEA has discontinued the 220 cm (87 inches) length beds (for whatever reason), and they no longer manufacture MALM beds of that size, even by special order. The only reachable IKEA store in the Netherlands naturally has none in stock either. In my opinion, this rather customer-unfriendly business policy makes purchasing the MALM bed difficult.
... and now to the topic:
I have considered buying a standard 140 x 200 cm (55 x 79 inches) MALM bed and extending it.
My goal is to make the extension so skillfully done that it is barely noticeable.
Has anyone here had experience with bed extensions or even done one themselves?
Could anyone possibly share some tips? I would appreciate every response!
I feel like I have searched half the internet but found nothing.
Kind regards
Marv
A brief background...
A few years ago, we were gifted a Malm bed measuring 160 x 220 cm (63 x 87 inches).
Now we have separated, and I ordered a 140 x 220 cm (55 x 87 inches) mattress for my new bed and would like to buy a MALM bed again.
I am aware that IKEA has discontinued the 220 cm (87 inches) length beds (for whatever reason), and they no longer manufacture MALM beds of that size, even by special order. The only reachable IKEA store in the Netherlands naturally has none in stock either. In my opinion, this rather customer-unfriendly business policy makes purchasing the MALM bed difficult.
... and now to the topic:
I have considered buying a standard 140 x 200 cm (55 x 79 inches) MALM bed and extending it.
My goal is to make the extension so skillfully done that it is barely noticeable.
Has anyone here had experience with bed extensions or even done one themselves?
Could anyone possibly share some tips? I would appreciate every response!
I feel like I have searched half the internet but found nothing.
Kind regards
Marv
I
IKEA-Profi12 Jul 2012 23:17
I am aware that IKEA has discontinued the 220cm (86.6 inches) beds (for whatever reason), and they no longer even manufacture corresponding MALM units to order.
Marv The 220cm (86.6 inches) bed size was always a special dimension at IKEA.
It eventually disappeared due to lack of demand.
IKEA operates with mass production, so custom-made items (which you probably wouldn’t want to pay for anyway) are simply not feasible.
For this reason, fortunately, cabinetmakers are still indispensable!
N
newswedishdesign14 Jul 2012 09:02I can only agree with Ikeaner – IKEA relies on products that can be mass-produced and sold in large quantities. If they were to sell only 1,000 units of a bed series instead of 1,000,000, the price would more than double, and the entire pricing strategy would be disrupted.
Regarding the modification of the Malm bed: Essentially, only the four side panels would need to be replaced. The exact cross-section of these panels doesn’t matter much, as long as the holes are in the same positions to connect them with the original bed’s headboard and footboard, and the parts are sturdy enough (bending strength). Depending on the bed’s color, simple wooden slats might even be used, which can achieve an appealing look with good sanding of the surface. A carpenter with reasonable prices should be able to make these parts for 50 to 100 EUR. With painting or special wood finishes or laminates, the cost will of course be higher. But even when factoring in the price of the Malm bed, this is an incredibly affordable price for a bed with a custom size.
Regarding the modification of the Malm bed: Essentially, only the four side panels would need to be replaced. The exact cross-section of these panels doesn’t matter much, as long as the holes are in the same positions to connect them with the original bed’s headboard and footboard, and the parts are sturdy enough (bending strength). Depending on the bed’s color, simple wooden slats might even be used, which can achieve an appealing look with good sanding of the surface. A carpenter with reasonable prices should be able to make these parts for 50 to 100 EUR. With painting or special wood finishes or laminates, the cost will of course be higher. But even when factoring in the price of the Malm bed, this is an incredibly affordable price for a bed with a custom size.
M
marv_502314 Jul 2012 09:26Somehow, I’m not surprised that in an Ikea “fan” forum there are no constructive answers or advice, but only justifications and praise for the Swedish company.
I don’t understand what’s so difficult about answering a simple question.
In all other forums, those who have nothing constructive to add simply remain silent.
Take care, you fan(atics).
No insults are intended here, please.
Thank you
I don’t understand what’s so difficult about answering a simple question.
In all other forums, those who have nothing constructive to add simply remain silent.
Take care, you fan(atics).
No insults are intended here, please.
Thank you
I
IKEA-Profi14 Jul 2012 18:50Somehow, I'm not surprised that in an Ikea "fan" forum, there are no constructive answers or tips, only justifications and praise for the Swedish company.
I don’t understand what’s so difficult about answering a simple question. In all other forums, those who have nothing constructive to add just keep quiet.
Take care, you fan(atics)Maybe it’s because many here are fed up with constant pointless shouting? And picking fights here will definitely get you plenty of help.
What do you expect from a forum called IKEA FANS??
Z
Zuzwinker15 Jul 2012 11:46*smile*
What are you expecting?
Ikea offers a program tailored to individual needs... in my store, I also only sell as few slow-moving items as necessary.
On the other hand, Ikea stands for creativity. It basically encourages mixing and matching everything—hanging curtains in front of shelves, installing kitchen wall cabinets in the bathroom, and so on...
So, if your bed is 20cm (8 inches) too short, I would take a look at the two end pieces, try to find appropriately thick wood at the hardware store, cut it to size, and drill the necessary holes. If you’re missing the right screws, you can go to the Ikea spare parts counter and get whatever you need. Even easier would be to simply buy a second used bed somewhere like Ebay or elsewhere (it only needs to be the 90cm (36 inches) size), and then cut the parts you need from that.
If you tell me now that you hadn’t thought of these ideas yourself, then I’m feeling pretty clever
What are you expecting?
Ikea offers a program tailored to individual needs... in my store, I also only sell as few slow-moving items as necessary.
On the other hand, Ikea stands for creativity. It basically encourages mixing and matching everything—hanging curtains in front of shelves, installing kitchen wall cabinets in the bathroom, and so on...
So, if your bed is 20cm (8 inches) too short, I would take a look at the two end pieces, try to find appropriately thick wood at the hardware store, cut it to size, and drill the necessary holes. If you’re missing the right screws, you can go to the Ikea spare parts counter and get whatever you need. Even easier would be to simply buy a second used bed somewhere like Ebay or elsewhere (it only needs to be the 90cm (36 inches) size), and then cut the parts you need from that.
If you tell me now that you hadn’t thought of these ideas yourself, then I’m feeling pretty clever
Similar topics