ᐅ Ikea Pax Auli/Färvirk Doors – Drawers Interfere with Sliding Door
Created on: 9 Aug 2015 21:39
P
PrenzlBerger
Hello everyone,
I assembled a Pax wardrobe with AULI/Färvik doors this weekend.
2 * Pax carcasses 100 x 58 x 236 cm (39 x 23 x 93 inches)
1 * Auli/Färvik sliding door pair 200 x 236 cm (79 x 93 inches)
2 * Komplement drawers 100 x 58 cm (39 x 23 inches)
2 * Komplement snap fittings
1 * Komplement drawer with glass front 100 x 58 cm (39 x 23 inches)
Overall, everything went quite well. The doors are installed (the mirrored door on the front left side, the frosted glass door on the rear right side). However, when I inserted the first drawer at the bottom left, I realized it cannot be pulled out. It hits the front sliding door. See this picture as well:
What did I do wrong?
If it matters: I haven’t installed the rails on the right and left yet.
I assembled a Pax wardrobe with AULI/Färvik doors this weekend.
2 * Pax carcasses 100 x 58 x 236 cm (39 x 23 x 93 inches)
1 * Auli/Färvik sliding door pair 200 x 236 cm (79 x 93 inches)
2 * Komplement drawers 100 x 58 cm (39 x 23 inches)
2 * Komplement snap fittings
1 * Komplement drawer with glass front 100 x 58 cm (39 x 23 inches)
Overall, everything went quite well. The doors are installed (the mirrored door on the front left side, the frosted glass door on the rear right side). However, when I inserted the first drawer at the bottom left, I realized it cannot be pulled out. It hits the front sliding door. See this picture as well:
What did I do wrong?
If it matters: I haven’t installed the rails on the right and left yet.
P
PrenzlBerger10 Aug 2015 21:44The drawer hits the front sliding door. This, in turn, hits the rear/inner sliding door.
I
IKEA-Experte11 Aug 2015 11:46First, you need to determine what the front door is hitting against on the rear side. Before fixing the issue, you should analyze the problem.
P
PrenzlBerger11 Aug 2015 20:43The front door hits the guide/metal bracket at the top against the back door (see photo, unfortunately rotated 90°).
The back door can be slid to the right until it ends about 0.5 meter (1.6 feet) from the outer edge of the exterior wall. (see photo, unfortunately rotated 90°)
This is approximately the amount by which the front door does not open far enough to allow the drawer to be opened.
The back door can be slid to the right until it ends about 0.5 meter (1.6 feet) from the outer edge of the exterior wall. (see photo, unfortunately rotated 90°)
This is approximately the amount by which the front door does not open far enough to allow the drawer to be opened.
I
IKEA-Experte11 Aug 2015 21:06Now we are getting closer to the point. The back door needs to be moved further to the right. The question now is, what is preventing this? Could it be that it doesn’t fit into Part 123078 at the top?
P
PrenzlBerger12 Aug 2015 11:35Yes, the corresponding "nipple" is located directly in front of the plastic nozzle you mentioned (see photo).
I
IKEA-Experte12 Aug 2015 12:35Now this is getting really strange. In the picture, the door aligns perfectly with the frame, unlike in the other one. Or is it just at the bottom because everything is crooked?
Similar topics