ᐅ Floor Plan of a Narrow, Rectangular L-Shaped House on a Triangular Plot with an Oak Tree

Created on: 4 Nov 2018 10:54
O
Oakland
Hello everyone!

We have purchased a triangular plot of land. As if that weren’t complicated enough, there is also a large oak tree that must be considered during the planning. In our initial considerations, it quickly became clear that the floor plan will have an L-shape.

Does anyone here have experience with this type of plot and a correspondingly shaped floor plan? What additional information is needed to get meaningful advice?

Best regards
11ant3 Aug 2020 14:09
Haus² schrieb:

There is only exactly one light gray.
Exactly. If I remember correctly, Pussi recommends a fresh stone gray.
https://www.instagram.com/11antgmxde/
https://www.linkedin.com/company/bauen-jetzt/
Climbee3 Aug 2020 16:36
Does it have to be plaster? There are also facade panels, which I find very interesting as an accent and a deliberate contrast to plaster. This should also eliminate the issue of cracking (which I’m actually hearing about for the first time).
Pinky03013 Aug 2020 16:40
There is another thread here that deals with staining issues on dark plaster. (in case the gray is meant to be closer to anthracite)
O
Oakland
4 Aug 2020 19:53
Is this mouse gray or more stone gray?

Gray flat putty knife with rounded end lying on light fabric.
W
Wickie
4 Aug 2020 20:48
The painter should have something to say about the color tone (regarding the "darkness").

There is a light reflectance value that, depending on the masonry or insulation, must not exceed (or fall below? I don’t remember) certain limits.
We also have quite dark exterior colors and a monolithic wall construction. In this case, darker colors can generally be chosen. With insulation, our painter would not have done that, because it can quickly lead to cracking and related problems.

However, the painter should know this!
O
Oakland
4 Aug 2020 20:54
Yes, he knows that, of course. The color shown above has an HBZ of 25. He doesn’t want to go any darker. If I understand correctly, this would be possible with our single-layer construction using insulating plaster. In that respect, I don’t understand his caution...