Hello everyone,
I have a Kallax shelf from IKEA that I have fixed to the wall using the original anti-tip safety bracket for security reasons. Unfortunately, the safety bracket does not hold reliably for me, especially if the shelf is slightly uneven or the floor shifts minimally. The included screws and wall plugs do not seem to have sufficient load capacity, and the shelf can still move or tip slightly despite the safety device.
My question: Do you have practical and proven tips on how to better secure the anti-tip bracket on the Kallax shelf? I am looking for specific solutions, such as alternative fixing materials, special screws, or tricks to ensure a safer attachment.
Thanks in advance for your help!
I have a Kallax shelf from IKEA that I have fixed to the wall using the original anti-tip safety bracket for security reasons. Unfortunately, the safety bracket does not hold reliably for me, especially if the shelf is slightly uneven or the floor shifts minimally. The included screws and wall plugs do not seem to have sufficient load capacity, and the shelf can still move or tip slightly despite the safety device.
My question: Do you have practical and proven tips on how to better secure the anti-tip bracket on the Kallax shelf? I am looking for specific solutions, such as alternative fixing materials, special screws, or tricks to ensure a safer attachment.
Thanks in advance for your help!
Maria35 schrieb:
If the floor is uneven, it can make it easier for the anti-tip device to come loose.Good to know. The shelf is actually standing on an old parquet floor that isn’t completely level in that spot.
Would it make sense to secure the anti-tip device not only at the top but also at the bottom of the shelf to minimize movement? Or is that effort not advisable?
dragan schrieb:
Could it make sense to secure the anti-tip device not only at the top but also at the bottom of the shelving unit to minimize movement completely?Yes, double securing—both at the top to the wall and at the bottom to the floor—significantly increases stability and greatly reduces the risk of tipping. This is especially recommended on uneven floors, as it provides multiple points for capturing movement.
If you decide to add floor fastenings, they should be installed in a way that does not damage the furniture and allows for easy removal. For example, small brackets or special holders fixed with appropriate screws.
In addition to mechanical securing, you should check whether the shelving unit is overloaded and ensure an even weight distribution, as this also affects tipping safety.
Similar topics