ᐅ Garden Fence Height 120 cm: Double Wire Mesh Fence 6/5/6 or 8/6/8?

Created on: 20 May 2021 18:08

Hello everyone,

I want to install a fence made of double wire mesh panels on top of a garden wall. Now I’m wondering if the panel thickness of 6/5/6 at a height of 120cm (47 inches) is sufficient or if it will be too flexible and I should rather use 8/6/8? If it makes a difference, the posts will be anchored with dowels and not concreted in, and no privacy slats will be installed!

Thanks in advance!

Best regards

Nida35a26 Oct 2021 10:27

Hopefully you used stainless steel screws, otherwise they will rust and look even worse.

rick201826 Oct 2021 11:39

Just use plastic covers. Preferably in fence color.

ShawN4626 Oct 2021 18:44

rick2018 schrieb:

Just put plastic covers on. Ideally in fence color.

I have thought about that too, but in my opinion, it still looks pretty bad.
The question is how well they fit, etc.
If then, I’d prefer metal ones in RAL7016. Are there any recommendations? Otherwise, I’ll just put “caps” on...

MirkoEhrens27 Oct 2021 09:19

#10

Hello Shawn, what you can do is paint the screws as well. I bought my fence from camas, and they offer matching spray paint for every color they provide. This is probably to cover the cut edges when you need to shorten something. I used that to paint the screws. They are now practically invisible. Best regards

driver5527 Oct 2021 11:21

#11

MirkoEhrens schrieb:

They are now practically invisible. Regards

For maybe a few months…

driver5527 Oct 2021 11:23

#12

ShawN46 schrieb:

I have considered that as well, but in my opinion it still looks quite poor.
The question is how well it fits and so on.
If so, I would prefer metal in RAL7016; are there any recommendations? Otherwise, I might just put on "caps"...

Until we know how the detail looks, there can be no meaningful advice.

Therefore:

hanghaus2000 schrieb:

Please show the fastening detail

ᐅ Garden Fence Height 120 cm: Double Wire Mesh Fence 6/5/6 or 8/6/8?

Reaktionen