ᐅ How can the Ikea HEMNES furniture be equipped with LED lighting?

Hello everyone, I am planning to equip my Ikea Hemnes wardrobe with integrated LED lighting to enhance its appearance and provide more light inside. The challenge is to find a solution that fits well within the furniture, is as discreet as possible, and does not require major structural modifications. Has anyone had experience with upgrading Hemnes furniture with LED lighting? Which types of products (light strips, spotlights, LED tape) work best? What should I consider when connecting the power supply? I would appreciate detailed advice, including tips on installation, power supply, and maintenance!

I would recommend LED strips that can be attached on the inside using adhesive tape. Place the power supply somewhat hidden at the bottom of the cabinet. For electricity, easily extend an outlet on the outside or use a cable conduit.

Regarding LED lighting in HEMNES, I highly recommend using warm white LEDs to avoid making the typical wood look appear cold. A combination of slim LED strips with small dimensions and small battery-powered spotlights can be practical if there is no power outlet nearby. It is also important to plan the cable management carefully to prevent any visible cables from being distracting.

Here is a brief guide on how to equip HEMNES with LED lighting:

- Planning: First, measure the cabinet precisely and decide which areas to illuminate (interior, shelves, back panel).
- Product selection: 12V LED strips are recommended because they are easier to handle and safer than 230V.
- Installation: Use adhesive tape on clean surfaces or alternatively small aluminum channels for better heat dissipation.
- Wiring: Route cables along the back; cable ducts or self-adhesive clips can help.
- Power supply: A hidden 12V power supply, for example under the bottom panel, provides the power.
- Switch: A small on/off switch or motion sensor can increase convenience.

Common mistakes to avoid:
- Poor adhesion without cleaning the surface
- Using cables with too long a cross-sectional length without reinforcement
- LED color temperature not matching the furniture color

With this, nothing stands in the way of a successful project.

LED spotlights or strips with 12V, preferably dimmable and equipped with a motion sensor. Hide the power supply under the cabinet. Lay the cables neatly.

klo40 schrieb:
Here is a brief guide on how to equip HEMNES with LED lighting:

Thank you for this well-structured overview, very helpful! What would you recommend regarding the power supply: using wardrobe switches with 230V directly, or converting to 12V instead? Are there any risks for the furniture or the lighting when upgrading to 230V? I’m unsure whether to run 230V wiring directly inside the wooden component or to stick with low voltage.