ᐅ What installation tips are helpful for wall mounting the Ikea Brimnes?
Created on: 20 Sep 2023 19:23
G
gla61Hello everyone,
I am currently planning the installation of my new Ikea Brimnes wardrobe and want to ensure the wall mounting is done optimally. I am especially interested in any installation tips from your experience that help achieve a secure hold, particularly regarding different wall types (e.g., concrete, drywall/plasterboard, brick) and the recommended anchors or screws.
I would also like to know if there are any special tricks for measuring and marking that make the mounting easier and help avoid incorrect holes.
Thanks in advance for any helpful advice!
I am currently planning the installation of my new Ikea Brimnes wardrobe and want to ensure the wall mounting is done optimally. I am especially interested in any installation tips from your experience that help achieve a secure hold, particularly regarding different wall types (e.g., concrete, drywall/plasterboard, brick) and the recommended anchors or screws.
I would also like to know if there are any special tricks for measuring and marking that make the mounting easier and help avoid incorrect holes.
Thanks in advance for any helpful advice!
Hello gla61,
First, a bit of theory on wall mounting before we get to the practical part: The Ikea Brimnes can hold quite a load, especially with books and decorations, so proper anchoring is crucial. The type of wall material plays a big role in the wall mounting process.
- For concrete walls, I recommend heavy-duty anchors such as metal anchors or sets with metal expansion bolts, as these provide good load capacity. It is important that the drill holes are at least 50mm (2 inches) deep and drilled straight to avoid damaging the anchor.
- For brick walls, it’s a bit simpler. Both nylon plugs and cavity anchors can work, provided the brick wall is thick enough. However, you should check in advance for any cavities. In cavity areas, specialized cavity anchors are necessary to prevent pull-out.
- For drywall (plasterboard) walls, I suggest using screws with toggle bolts (also called “Molly bolts”), since standard plugs will not hold. Be careful to tighten the screws only enough to avoid damaging the drywall panel.
When measuring, I advise taking your time: Use a spirit level or a laser level to check both horizontal and vertical alignment. Mark with a pencil and double-check everything before drilling.
It is especially important to prepare the complete mounting for one piece first, then tighten all screws gradually and evenly to avoid stress on the furniture.
What type of wall do you have exactly? And do you have any special tools like a hammer drill or laser level?
First, a bit of theory on wall mounting before we get to the practical part: The Ikea Brimnes can hold quite a load, especially with books and decorations, so proper anchoring is crucial. The type of wall material plays a big role in the wall mounting process.
- For concrete walls, I recommend heavy-duty anchors such as metal anchors or sets with metal expansion bolts, as these provide good load capacity. It is important that the drill holes are at least 50mm (2 inches) deep and drilled straight to avoid damaging the anchor.
- For brick walls, it’s a bit simpler. Both nylon plugs and cavity anchors can work, provided the brick wall is thick enough. However, you should check in advance for any cavities. In cavity areas, specialized cavity anchors are necessary to prevent pull-out.
- For drywall (plasterboard) walls, I suggest using screws with toggle bolts (also called “Molly bolts”), since standard plugs will not hold. Be careful to tighten the screws only enough to avoid damaging the drywall panel.
When measuring, I advise taking your time: Use a spirit level or a laser level to check both horizontal and vertical alignment. Mark with a pencil and double-check everything before drilling.
It is especially important to prepare the complete mounting for one piece first, then tighten all screws gradually and evenly to avoid stress on the furniture.
What type of wall do you have exactly? And do you have any special tools like a hammer drill or laser level?
bapar schrieb:
It is especially important to fully prepare the attachment of a part first and then tighten all screws evenly step by step to avoid stress in the furniture.Thank you for the detailed response! My wall is actually solid brick, and I have a standard rotary hammer drill, but no laser level—only a traditional spirit level and a measuring tape.
Could you also say something about choosing the right wall plugs that work particularly well with brick walls? The ones supplied by Ikea seem a bit thin.
Also, I’m wondering if it’s advisable to have a second person helping to install the cabinet, or if it’s manageable alone with careful work.
Hello gla61,
for brick walls, I would definitely recommend using sturdier nylon or universal wall plugs that are a bit thicker and longer than the standard plugs from Ikea. This way, you can ensure that the cabinet will hang securely even when fully loaded. From my experience, the thinner plugs tend to give way over time with heavier shelves.
Regarding your question about helpers: it is definitely easier and safer to have someone assist with positioning—especially with large cabinets like Brimnes, holding it in place while screwing it in can be tricky without help. If you’re working alone, place the cabinet against the wall and stabilize it slightly with wedges, for example, so your hands are free.
One more tip: use a marking aid, such as a long board under the cabinet, to check the correct height and alignment before drilling. This will help you avoid holes that don’t fit later on.
for brick walls, I would definitely recommend using sturdier nylon or universal wall plugs that are a bit thicker and longer than the standard plugs from Ikea. This way, you can ensure that the cabinet will hang securely even when fully loaded. From my experience, the thinner plugs tend to give way over time with heavier shelves.
Regarding your question about helpers: it is definitely easier and safer to have someone assist with positioning—especially with large cabinets like Brimnes, holding it in place while screwing it in can be tricky without help. If you’re working alone, place the cabinet against the wall and stabilize it slightly with wedges, for example, so your hands are free.
One more tip: use a marking aid, such as a long board under the cabinet, to check the correct height and alignment before drilling. This will help you avoid holes that don’t fit later on.
I’ll add a few points:
- When mounting the Brimnes, make sure the top part of the cabinet is firmly against the wall. There should be no gaps or pressure between the wall and the cabinet, as this can cause uneven load distribution.
- For brick walls, I recommend using anchors with a larger diameter (8 mm or more) to better distribute the load.
- Screws should be long enough, ideally at least 6 cm (2.4 inches), to ensure a secure hold in the masonry.
- When drilling, always use a dust catcher under the drill hole to keep the workspace clean and prevent dust from falling into the hole, which can weaken the anchor’s grip.
- When mounting the Brimnes, make sure the top part of the cabinet is firmly against the wall. There should be no gaps or pressure between the wall and the cabinet, as this can cause uneven load distribution.
- For brick walls, I recommend using anchors with a larger diameter (8 mm or more) to better distribute the load.
- Screws should be long enough, ideally at least 6 cm (2.4 inches), to ensure a secure hold in the masonry.
- When drilling, always use a dust catcher under the drill hole to keep the workspace clean and prevent dust from falling into the hole, which can weaken the anchor’s grip.
Similar topics