ᐅ Are there affordable LED spotlights available for retrofitting old KALLAX units?
Created on: 15 Dec 2020 09:17
K
kajari51
Hello everyone,
I am considering how to find an affordable solution to retrofit LED spotlights into my old IKEA KALLAX shelving unit. I want to improve the lighting of the shelf, especially in the lower section, without too much effort or high costs. I am mainly looking for inexpensive LED spotlights that are easy to install, possibly battery-powered or USB-operated, so I don’t have to carry out major electrical work. Has anyone had experience with such retrofit LED lights for KALLAX? Which models would you recommend, and what should I watch out for? Thanks for your tips!
I am considering how to find an affordable solution to retrofit LED spotlights into my old IKEA KALLAX shelving unit. I want to improve the lighting of the shelf, especially in the lower section, without too much effort or high costs. I am mainly looking for inexpensive LED spotlights that are easy to install, possibly battery-powered or USB-operated, so I don’t have to carry out major electrical work. Has anyone had experience with such retrofit LED lights for KALLAX? Which models would you recommend, and what should I watch out for? Thanks for your tips!
Hello kajari51,
you have already received some good advice. Additionally, I would recommend ensuring that the LED spots produce as little heat as possible. This is especially important with shelves made of wood or wood-based panels to prevent warping or damage.
Also, make sure the power supply is safe – USB solutions with certified power adapters are often the best choice.
If mounting the lights on the underside of the shelves doesn’t look appealing to you, you could also experiment with flexible LED strips. They are inexpensive, bright, easy to adjust, and can be dimmed.
you have already received some good advice. Additionally, I would recommend ensuring that the LED spots produce as little heat as possible. This is especially important with shelves made of wood or wood-based panels to prevent warping or damage.
Also, make sure the power supply is safe – USB solutions with certified power adapters are often the best choice.
If mounting the lights on the underside of the shelves doesn’t look appealing to you, you could also experiment with flexible LED strips. They are inexpensive, bright, easy to adjust, and can be dimmed.
nanidra schrieb:
Honestly: If you don’t do a bit of DIY and drill or screw properly, you won’t get decent lighting.Sure, that might be true, but not everyone wants to drill or do DIY. I think adhesive strip solutions offer a great compromise for beginners – simple, quick, and affordable!
And yes, sometimes you just have to replace the adhesive strip, but for the price, I find that perfectly acceptable.
Just give it a try, and if it doesn’t hold, you can always try other options! 🙂
GiRoyce schrieb:
you can also experiment with flexible LED strips; they are affordable and brightAbsolutely correct. LED strips have the advantage over individual spotlights that you can illuminate an area more evenly. The price is often comparable, especially if you buy inexpensive 5V USB strips.
Just a note: For retrofitting, make sure to use high-quality adhesive tapes (3M) and don’t forget to clean the surfaces thoroughly before installation. That’s the only way to ensure they hold permanently.
retau schrieb:
For the price, I think that’s absolutely fine.Thanks to everyone for the encouraging responses! Right now, I’m leaning more towards flexible LED strips or USB-powered spotlights to keep things flexible.
GiRoyce schrieb:
make sure the LED spotlights generate as little heat as possible – that’s a good point, I hadn’t thought of that.Does anyone have a specific recommendation for where to find these affordably and with good quality? I’d appreciate brand or store suggestions that offer a good price-performance ratio.
It would be great to get any tips you have; I’d really appreciate it!
Similar topics