Hello everyone,
some time ago, I installed my IKEA Metod kitchen, but I noticed that some screws around the cabinet carcasses start to loosen after a short period. This mostly affects the connecting screws that hold the individual modules together, but screws on the pull-out drawers also feel stiff or slightly loose.
My question is: How can one effectively fix loose screws in IKEA Metod kitchen furniture?
I am especially interested in any tips or tricks for retightening the screws in a way that prevents them from loosening again quickly. Are there any specific tools or materials (such as threadlocker or washers) recommended for Metod?
I would appreciate any advice on the correct procedure—from dismantling the parts to the final tightening.
Best regards
Adolf4
some time ago, I installed my IKEA Metod kitchen, but I noticed that some screws around the cabinet carcasses start to loosen after a short period. This mostly affects the connecting screws that hold the individual modules together, but screws on the pull-out drawers also feel stiff or slightly loose.
My question is: How can one effectively fix loose screws in IKEA Metod kitchen furniture?
I am especially interested in any tips or tricks for retightening the screws in a way that prevents them from loosening again quickly. Are there any specific tools or materials (such as threadlocker or washers) recommended for Metod?
I would appreciate any advice on the correct procedure—from dismantling the parts to the final tightening.
Best regards
Adolf4
Gilbert schrieb:
Basically, the system would need to be completely reconsidered, either through better fittings or different materials.Interesting point, Gilbert, and I partly agree, but I also see a challenge here: the value for money of IKEA Metod is a major selling point.
The criticism regarding the weakness of the materials is certainly valid, yet the impact of proper handling and careful installation on the service life is often underestimated.
What bothers me, however, are the lasting promises IKEA makes without clearly communicating that regular maintenance and inspection of the furniture should be factored into its design.
In short: better user education is needed in my opinion. Not everyone knows, for example, that tightening the screws should be a scheduled maintenance step.
flota schrieb:
A good feeling for and experience with the type of wood is usually sufficient.I agree with that, although I have come across cases where special tools were necessary. I’m curious if others can share further experiences or perhaps technical data sheets/manufacturer specifications.
Best regards
CORYGAU
Similar topics