ᐅ Why do the doors on the Kallax unit squeak more and more over time?
Created on: 5 Sep 2019 10:23
G
glafarHello everyone,
I have noticed that the doors of my IKEA Kallax shelving unit start to squeak more and more over time when opening or closing them. The noise becomes significantly louder and more annoying after a few months. Since the shelving unit is relatively simple in design and mainly made of wood or wood-based materials, I’m wondering what exactly might be causing the increasing squeaking.
Could it be due to material movement, the type of hinges used, or could it also be a result of changes in indoor humidity levels? Is there a way to permanently fix the squeaking without having to replace the hinges?
I would appreciate it if anyone has experience with this issue or can offer advice on what might be causing it and the best way to resolve it.
Thanks in advance!
I have noticed that the doors of my IKEA Kallax shelving unit start to squeak more and more over time when opening or closing them. The noise becomes significantly louder and more annoying after a few months. Since the shelving unit is relatively simple in design and mainly made of wood or wood-based materials, I’m wondering what exactly might be causing the increasing squeaking.
Could it be due to material movement, the type of hinges used, or could it also be a result of changes in indoor humidity levels? Is there a way to permanently fix the squeaking without having to replace the hinges?
I would appreciate it if anyone has experience with this issue or can offer advice on what might be causing it and the best way to resolve it.
Thanks in advance!
Hello glafar,
I can relate to your question, as I also found such noises increasingly annoying over time with my Kallax doors.
The squeaking often comes from friction at the hinges, which can get worse over time due to buildup or material wear. Additionally, wood changes with humidity: it expands and contracts, which combined with fixed hinges can cause more noise.
Yes, that is quite possible. Wood reacts more to fluctuations in moisture.
A good way to fix the squeaking is to clean and lubricate the hinges with a suitable lubricant, such as silicone spray or graphite powder. It’s important not to use oily substances that attract dust, as this can make the problem worse in the long run.
If that doesn’t help, you can also check the screws on the hinges. If they are too loose or too tight, this can sometimes cause noise.
I hope this helps you! 🙂
I can relate to your question, as I also found such noises increasingly annoying over time with my Kallax doors.
The squeaking often comes from friction at the hinges, which can get worse over time due to buildup or material wear. Additionally, wood changes with humidity: it expands and contracts, which combined with fixed hinges can cause more noise.
glafar schrieb:
Could it be due to material movement, the type of hinges, or could it also be a result of changing humidity levels in the home?
Yes, that is quite possible. Wood reacts more to fluctuations in moisture.
A good way to fix the squeaking is to clean and lubricate the hinges with a suitable lubricant, such as silicone spray or graphite powder. It’s important not to use oily substances that attract dust, as this can make the problem worse in the long run.
If that doesn’t help, you can also check the screws on the hinges. If they are too loose or too tight, this can sometimes cause noise.
I hope this helps you! 🙂
I find Glafar’s question very important because I have the same issue with my Kallax. I find the squeaking really annoying, especially in the evening in the living room when everything is quiet.
That explains a lot, I have actually never checked or cleaned my hinges.
I also wonder if the wood itself or the surface treatment might play a role? Does anyone know if it helps to simply remove the doors completely and sand the edges a bit? Or do changes in the wood not make much of a difference?
I’m grateful for any tips, and thanks to Laurence for the detailed explanation!
Laurence schrieb:
The squeaking often occurs due to friction on the hinges, which increases over time because of deposits or material wear.
That explains a lot, I have actually never checked or cleaned my hinges.
I also wonder if the wood itself or the surface treatment might play a role? Does anyone know if it helps to simply remove the doors completely and sand the edges a bit? Or do changes in the wood not make much of a difference?
I’m grateful for any tips, and thanks to Laurence for the detailed explanation!
Similar topics