Hello everyone,
I recently chose a Malm bed from IKEA and am generally satisfied with the design and workmanship. However, I am wondering how to properly maintain this piece of furniture to ensure it remains stable and attractive even after several years. Especially with solid wood or veneered furniture, there are often specific recommendations.
What is the best way to care for Malm beds to extend their lifespan? Are there any special cleaning tools, suitable maintenance products, or practical tips you can recommend?
I’m also interested in whether there is anything to consider regarding stability – for example, regularly tightening screws or similar measures.
I look forward to detailed experiences and advice, including tips on what to avoid. Thank you in advance!
I recently chose a Malm bed from IKEA and am generally satisfied with the design and workmanship. However, I am wondering how to properly maintain this piece of furniture to ensure it remains stable and attractive even after several years. Especially with solid wood or veneered furniture, there are often specific recommendations.
What is the best way to care for Malm beds to extend their lifespan? Are there any special cleaning tools, suitable maintenance products, or practical tips you can recommend?
I’m also interested in whether there is anything to consider regarding stability – for example, regularly tightening screws or similar measures.
I look forward to detailed experiences and advice, including tips on what to avoid. Thank you in advance!
RETRAVIS schrieb:
Another important note: Direct sunlight can fade the surfaceSure, but I wonder if this effect is really that significant with a Malm bed – furniture usually isn’t kept in the same spot after a few months anyway, right?
I also think many people focus way too much on “perfect” care. Honestly, the bed is meant for sleeping, and since it’s not an expensive designer piece, I don’t see a reason to over-maintain it. Care instructions are of course important, but who wants to live with furniture all the time like it’s in a museum? ;-)
Do you think that’s too conservative?
E
edisonbla17 Jun 2022 15:23I believe a little care never harms a piece of furniture! 😊
For the Malm bed, I usually use a gentle cleaning product that doesn’t weigh down the surface. From time to time, I also check the screws – even if the bed doesn’t wobble, minimal use can still cause things to loosen a bit.
Yes, I agree with that, but my bed still gets a bit of attention now and then. Nothing really lasts long without some care.
For the Malm bed, I usually use a gentle cleaning product that doesn’t weigh down the surface. From time to time, I also check the screws – even if the bed doesn’t wobble, minimal use can still cause things to loosen a bit.
ANMARCOS schrieb:
... the bed is for sleeping, and ... I don’t see any reason for over-maintenance 🙂
Yes, I agree with that, but my bed still gets a bit of attention now and then. Nothing really lasts long without some care.
E
edisonbla18 Jun 2022 09:33Addition to my previous post:
I would also like to comment on moisture exposure – Malm beds should definitely not be placed in rooms with high humidity, such as bathrooms or poorly ventilated basements.
Moisture can soften the laminate and, in extreme cases, damage the particleboard underneath. It is better to ensure good air circulation.
I would also like to comment on moisture exposure – Malm beds should definitely not be placed in rooms with high humidity, such as bathrooms or poorly ventilated basements.
Moisture can soften the laminate and, in extreme cases, damage the particleboard underneath. It is better to ensure good air circulation.
edisonbla schrieb:
Malm beds should definitely not be placed in rooms with high humidityI agree with that. Additionally, I recommend avoiding direct contact with water, such as placing dripping laundry or wet clothes on the frame.
This also promotes swelling of the particleboard, which affects both stability and appearance.
It is therefore important not to misuse Malm beds as a general-purpose storage surface.
To complete the series:
What do you think about applying oil to the bed or lubricating the screws during assembly or disassembly to prevent creaking?
I haven’t done this myself yet, but I feel like it shouldn’t reduce the lifespan of the mechanism, right?
Or are the metal and wood components designed so that this isn’t necessary at all?
What do you think about applying oil to the bed or lubricating the screws during assembly or disassembly to prevent creaking?
I haven’t done this myself yet, but I feel like it shouldn’t reduce the lifespan of the mechanism, right?
Or are the metal and wood components designed so that this isn’t necessary at all?
Similar topics