Hello!
I'll start.
Heated area 200m2 (2,153 sq ft)
KfW 55 standard
Mechanical ventilation with heat recovery
Current outdoor temperature 6°C (43°F)
Heating energy consumption including hot water 35 kWh
Electricity consumption 9 kWh
COP 3.88
I'll start.
Heated area 200m2 (2,153 sq ft)
KfW 55 standard
Mechanical ventilation with heat recovery
Current outdoor temperature 6°C (43°F)
Heating energy consumption including hot water 35 kWh
Electricity consumption 9 kWh
COP 3.88
T
T_im_Norden30 Jan 2021 07:19Is TA the outside temperature?
T_im_Norden schrieb:
Is TA the outside temperature?Yes, averaged over 24 hoursT
T_im_Norden30 Jan 2021 14:35Looks good.
Your heat pump wasn’t modulating, right?
A 5-hour heating phase at that temperature is really impressive.
Do you also have the heat output data?
Your heat pump wasn’t modulating, right?
A 5-hour heating phase at that temperature is really impressive.
Do you also have the heat output data?
T_im_Norden schrieb:
Looks good.
Your heat pump wasn’t modulating, right?
A 5-hour heating phase at that temperature is really good.
Do you have the heat energy data as well? It is not modulating. To calculate the COP, I would need to reset the heat energy data. The COP is around 4, at least that’s what I determined at the beginning of the month based on a 24-hour period.