ᐅ How can I securely fasten Malm furniture to laminate flooring?

Hello everyone, I recently purchased some IKEA Malm furniture and want to secure it safely and firmly on my laminate flooring without causing any damage to the floor. I understand that simply screwing through the laminate is not a good idea, as it would damage the floor. Therefore, I am looking for proven methods or recommendations on how to securely fix the Malm cabinets or dressers so they don’t slide or tip over, especially on slightly uneven laminate.

Are there specific screw systems, adhesive solutions, or other options that are recommended here? I would appreciate any tips, experiences, and possibly information on how to safely remove and change the fasteners if needed. Thanks in advance!

Hello, I would stick simple anti-slip pads under the furniture. They can be removed without leaving any residue and prevent slipping. If you want it to be more stable, use special connectors to attach the pieces directly to each other; I would avoid fixing them to the floor.

Hello Repau55, that’s a really good question since laminate flooring is delicate and you want to ensure the stability of the Malm furniture. Generally, I strongly advise against any direct screwing into the laminate floor because the combination of moisture in the laminate and screw holes can cause significant damage. I would suggest focusing on securing the furniture pieces to each other to prevent tipping, for example using metal brackets that create cross-connections. Additionally, I recommend using non-slip materials such as rubber or felt pads placed between the furniture and the laminate. The material should provide some friction but not leave adhesive residue.

If you want to attach the furniture to the wall, corner screws with wall anchors could be an option, provided it is allowed and the landlord agrees. Some of my clients also fasten connections underneath the furniture pieces so they act as a single unit and stand much more securely. With laminate, it’s important that there is no permanent pressure on one spot that compresses or deforms the material. From my experience, a thin, soft cork pad works well underneath and is stable.

Have you checked how level the laminate floor really is? If there are visible uneven spots, an underlay that slightly levels the surface can help prevent the furniture from wobbling. Which Malm furniture do you have exactly? Dressers, nightstands, or beds? Depending on the model, I would recommend different fixing methods. I look forward to your reply to assist you more precisely.

TEBILO schrieb:
From my own experience: A thin, soft cork pad works well underneath and is stable.

I can confirm the cork tip, as I have used it myself and was quite satisfied. At first, I was worried it wouldn’t really secure the furniture because my laminate flooring is slightly uneven, but the cork piece evened out the irregularities well and the dresser stood firmly.

Repau55 schrieb:
especially with somewhat uneven laminate

I know how frustrating it can be when furniture tips or wobbles, especially with children or pets around. That’s why I find TEBILO’s advice really helpful, and I would also recommend using soft rubber pads in addition to cork, which provide some anti-slip properties.

If you decide to fix the furniture to the wall, make sure the screws go into wall anchors and not just the plaster, otherwise the furniture can pull away from the drywall under load. In general, I would only do this kind of fixing if you are 100% sure you can remove it later without leaving any damage.