ᐅ Reinforcement plans at a scale of 1:100

Hello, does something like this exist, or does it even make sense to talk about it?

I have these from the structural engineer. They are more relevant for the civil engineer. Karsten

Reinforcement plans are part of the construction drawings (intended primarily for builders, foremen, and site managers), so I would expect them to be at a scale of around 1:50. There is little of interest for the homeowner; they are more or less layout plans for standardized mats, with measurements and a few details about individual rebar.

Who are you (as a computer scientist, I assume: the homeowner), and what did you want to discuss about this?

Reinforcing steel is the internal stuff, somewhat unexciting ;-)

---

https://www.instagram.com/11antgmxde/
https://www.linkedin.com/company/bauen-jetzt/

Reinforcement plans as execution drawings for the construction site are drafted in scales of 1:50 / 1:20 or more detailed at 1:5. Structural engineer’s plans at 1:100 are intended more as location plans for the building permit / planning permission, serving as a graphic documentation of the structural calculations submitted with the application. However, they are not suitable as a scale for use on the construction site.

Yes, simply put, the 1:100 scale model (used during the design phase) is the "building permit scale," and the building permit application also includes structural engineering calculations / verification of structural integrity, showing clearly how each individual "block" of the floor slab assembly is supported and how it is intended to be protected against sagging. These are plans for approval by the authorities—not for the homeowner or the construction team.

---

https://www.instagram.com/11antgmxde/
https://www.linkedin.com/company/bauen-jetzt/