ᐅ Floor Plan Design for a Single-Family Home of Approximately 150 m²

Created on: 12 Feb 2018 18:09
C
chrisw81
Hello,

After a long search, we signed the notarized contract for the land purchase at the end of December. We are now actively planning the floor plan. Unfortunately, the plot is somewhat awkwardly shaped (not rectangular), which creates some limitations for the layout from our perspective. We already have a first draft, but there are several areas we don’t like and are unsure how to improve. Maybe you have some ideas; we would appreciate your input.

Development Plan / Restrictions
Plot size: 601 m² (6465 sq ft)
Building envelope, building line, boundary: Building line with the house on the west side
Peripheral setbacks: 7 m (23 ft) from the street (north), otherwise the usual 3 m (10 ft)
Number of parking spaces: 2 desired
Number of floors: 1 full story allowed
Roof style: Gable roof
Design style: open construction method
Orientation: South
Maximum heights / limits: Ridge height max. 8.5 m (28 ft)
Additional requirements: Max. 100 m² (1076 sq ft) of built-up area

Client Requirements
Style, roof form, building type: Solid construction house, rectangular, no bay windows, no projections, etc., gable roof
Basement, floors: no basement; 1.5 stories
Number and age of residents: 2 people, age between 30 and 40, possibly children later
Space needs on ground floor and upper floor: Ground floor – living/dining room, kitchen, guest toilet, utility room, office
Office: family use or home office?: family use
Guest stays per year: 20 days
Open or closed architecture: open living area, closed hallway
Conservative or modern style: conservative
Open kitchen, kitchen island: open kitchen, island without cooktop
Number of dining seats: 2-4
Fireplace: yes, chimney planned
Music/stereo wall: no
Balcony, roof terrace: no
Garage, carport: carport
Utility garden, greenhouse: no
Further wishes, special features, daily routine, and reasons for preferences:
- A wardrobe area on the ground floor is important where coats can be stored relatively out of sight.
- On the upper floor, it would be nice to have an open gallery with a desk or similar (not a must and not necessarily next to the stairs).
- A walk-in closet would be nice but not essential.
- A storage room on the upper floor is very important since we do not have a basement.

House Design
Who created the design:
- Basic design by the construction company (FIBAV Stadthaus Vision Studio)
- DIY modifications based on online floor plans (especially Viebrockhaus Maxime 330)
What do you particularly like? Why?:
- Layout of the living/dining area and the narrowing kitchen reduces the hallway effect a bit
- Many windows in the living/dining area
- Wide hallway on the ground floor
What do you dislike? Why?:
- Few options to place furniture (dresser, wardrobe) in the ground floor hallway due to many doors
- Very large hallway upstairs, considered wasted space
- Bedroom is quite small; should be the largest room upstairs (preferably 16 m² (172 sq ft), children’s rooms rather 14 m² (151 sq ft))
- Stair placement limited by chimney location
- Door placement upstairs limited by chimney
- A staircase rotated 90 degrees (entrance next to front door) would appeal more
- Difficult to align windows upstairs and downstairs on the gable end vertically
- Floor-to-ceiling windows upstairs; wider windows with a sill height around 100 cm (40 inches) would be preferred
Price estimate by architect/planner: 200,000 €
Personal price limit for the house including equipment: 210,000 €
Preferred heating technology: gas heating

What details or expansions could you give up?
- Can do without: gallery next to stairs upstairs. Living area could also be narrower (e.g., 4.20 m (14 ft) instead of 4.47 m (15 ft))
- Cannot do without: storage room upstairs, shower in guest toilet, extra natural light in the ground floor hallway (e.g., side panel on front door or window)

Why was the design made this way? For example, standard plan from planner?
- Since the house has very little space on the south side, the house should be very narrow in order not to waste more space to the south. It should be wider so that living, dining, and kitchen areas face south as much as possible.
Were corresponding wishes from the architect implemented? No architect meeting has taken place yet.

What is the most important/basic question about the floor plan summarized in 130 characters?
How can the ground floor hallway be better designed to fit a wardrobe? Can the stairs be positioned better or replaced? Should the hallway be enlarged and living space reduced? How can the upstairs hallway be better utilized? Can the bedroom be enlarged? Is it possible to swap the bedroom with another room, e.g., move it to the southeast to allow a walk-in closet?

Thank you very much in advance for your criticism and suggestions!

Lageplan eines Baugrundstücks mit Parzellen, Straßenverlauf und Gebäudestrukturen.


Grundriss: Kochen/Essen/Wohnen, HWR, WC, Diele, Gast, Treppenhaus, Schornstein.


Grundriss Obergeschoss: Zimmer 1, Zimmer 2, Schlafen, Bad, Flur/Galerie, Abstell, Schornstein.
11ant3 Mar 2018 13:57
kaho674 schrieb:
However, chimney 2 is becoming a problem again here.

Do you mean chimney 1?
ypg schrieb:
But you do know what a modern gas heater’s “chimney” looks like, right?

For all I care, that thing could also just pass through the external wall like a pipe. However, I would find that somewhat odd visually, especially next to a masonry chimney for the wood-burning stove.

But since a homeowner is allowed to limit themselves to the "level of detail" typical for rough sketches, I can well accept the (although unfamiliar to me) perspective of putting such things into the "architectural details" category.
https://www.instagram.com/11antgmxde/
https://www.linkedin.com/company/bauen-jetzt/
kaho6743 Mar 2018 14:03
11ant schrieb:
You mean chimney 1?
I am hoping for an air-source heat pump.
Mycraft3 Mar 2018 15:02
Condensing boilers have an ACS (air-flue system), meaning there is no traditional chimney, and they look like this:


Dark corrugated metal roof with vertical flue pipe; wooden structure visible on the left.


So, they are quite unremarkable and can also run through the insulation, protruding from any part of the roof.
Y
ypg
3 Mar 2018 20:01
Mycraft schrieb:
Condensing boilers have an LAS (air-flue system), meaning they don’t require a traditional chimney, and they look like this:



So completely unremarkable, they can even run through insulation and protrude from the roof at any point.

Exactly.
I also find it strange that most of the focus here is on the chimney (living room) instead of maximizing the best use of clear square meters for the most living comfort (and yes, a fireplace is fine too, but the chimney positioning should really be left to the architect). Bringing up false side issues here only causes confusion.

I don’t think it’s a problem not to know everything. But it is a problem to post something in this forum as if it were true when you don’t know it. Sometimes it’s better to just keep quiet than to later be part of a forum full of misinformation [emoji35]
kaho6744 Mar 2018 07:25
ypg schrieb:
... Just keep quiet instead of later being part of a deceptive and dishonest forum [emoji35]

Off-topic: I think Yvonne is on her period again. Just ignore it.

The last version might work even better without doors? But then there’s a separation of living space.

Floor plan: open space in the center with dining table; kitchen on the left, guest room on the right, bathroom on the left, technical/storage room


Or you could simply remove the wall completely and relocate the fireplace:

Floor plan of a house: open space with dining table, adjacent rooms, guest room, shower, technical room, hallway.
K
kbt09
4 Mar 2018 08:41
Of course, it makes the dining area more spacious. The downside is having to always pass through a proper entrance area—vestibule—to get upstairs. It’s the same before, but without a door, the vestibule isn’t really noticed. Anyway, my respect for your variations.