Hello to all forum readers,
I have a question for those of you experienced in house construction and floor plan design. Is it possible to fit two residential units on a footprint of 185 sqm (building area approx. 9 m x 20 m (30 ft x 66 ft))? How many square meters are typically lost to walls and staircases?
I have done some preliminary calculations using guideline values and created a rough floor plan. I came to the conclusion that it will be very tight if comfortable room sizes are desired. For this reason, I would really like to hear the assessment of someone with experience.
The goal is to build a 2-room apartment and a 3-room apartment with a balcony or terrace on each floor. The multi-family house is planned to have a total of 6 units (2 full floors plus attic).
Do you think it is feasible to build approximately 78 sqm (840 ft²) and 65 sqm (700 ft²) on one level within a floor area ratio of 185 sqm?
Best regards,
Karl
I have a question for those of you experienced in house construction and floor plan design. Is it possible to fit two residential units on a footprint of 185 sqm (building area approx. 9 m x 20 m (30 ft x 66 ft))? How many square meters are typically lost to walls and staircases?
I have done some preliminary calculations using guideline values and created a rough floor plan. I came to the conclusion that it will be very tight if comfortable room sizes are desired. For this reason, I would really like to hear the assessment of someone with experience.
The goal is to build a 2-room apartment and a 3-room apartment with a balcony or terrace on each floor. The multi-family house is planned to have a total of 6 units (2 full floors plus attic).
Do you think it is feasible to build approximately 78 sqm (840 ft²) and 65 sqm (700 ft²) on one level within a floor area ratio of 185 sqm?
Best regards,
Karl
ypg schrieb:
Where?Here
http://www.hausbau-forum.de/threads/ddh-mit-max-53-3-flaeche-und-max-tiefe-ca-8m.16835/
When reading, it says here that each residential unit is about 45 square meters (484 square feet)...
Climbee schrieb:
Here
http://www.hausbau-forum.de/threads/ddh-mit-max-53-3-flaeche-und-max-tiefe-ca-8m.16835/
When reading, it refers here to 45 m² (485 sq ft) per housing unit...Txs 🙂
N
nightdancer18 Aug 2016 10:49Karl85 schrieb:
Do you think building approximately 78sqm (840 sq ft) and approximately 65sqm (700 sq ft) on one level with a floor area ratio of 185sqm (1990 sq ft) is feasible?
Best regards
KarlAre you familiar with the requirements for a multi-family house in Hesse?
Here in Baden-Württemberg, in my city, this would mean 10 car parking spaces, 12 covered bicycle parking spaces close to the entrance, a storage room in each apartment, space for laundry drying in each apartment, at least one floor accessible for people with disabilities/wheelchair users (so in your case, 2 apartments), and then a space/room of 6sqm (65 sq ft) at the entrance area for walkers/strollers......
Similar topics