Hello,
I’m interested in knowing your current daily heating consumption.
Please provide it either in kWh for heat pumps or in m³ for gas, along with the room temperature, heated area, and energy standard (e.g., Energy Saving Ordinance 2016, KFW70, KfW 55, etc.).
I’m curious about your consumption at the current temperatures.
I’m interested in knowing your current daily heating consumption.
Please provide it either in kWh for heat pumps or in m³ for gas, along with the room temperature, heated area, and energy standard (e.g., Energy Saving Ordinance 2016, KFW70, KfW 55, etc.).
I’m curious about your consumption at the current temperatures.
Goldi09111 schrieb:
Where can you find prices like these?Unfortunately, not in Saxony.
G
Goldi0911110 Feb 2017 21:08Musketier schrieb:
Unfortunately not Saxony.Ok, noted, thanks!
H
Henny071011 Apr 2018 21:20Bumping up the post again
I built a 140m2 (1507 sq ft) KFW70 house in 2016. My gas consumption for heating and hot water in one year was 10,500 kWh. The room temperature in the living room and bathroom was always around 22-23°C (72-73°F).
The other rooms were about 20°C (68°F).
No night setback and underfloor heating throughout the house.
I built a 140m2 (1507 sq ft) KFW70 house in 2016. My gas consumption for heating and hot water in one year was 10,500 kWh. The room temperature in the living room and bathroom was always around 22-23°C (72-73°F).
The other rooms were about 20°C (68°F).
No night setback and underfloor heating throughout the house.
I now have some data available.
Key points:
KfW 50 standard, 120 m2 (1,292 sq ft), underfloor heating (no temperature reduction or other “optimization”), geothermal energy (deep drilling), values for heating/cooling and hot water. Temperature maintained everywhere at 22-23°C (72-73°F).
Key points:
KfW 50 standard, 120 m2 (1,292 sq ft), underfloor heating (no temperature reduction or other “optimization”), geothermal energy (deep drilling), values for heating/cooling and hot water. Temperature maintained everywhere at 22-23°C (72-73°F).
ntsa86 schrieb:
By now, I also have some data.
Key points:
KfW50 standard, 120m2 (1292 sq ft), underfloor heating (no setback or other "optimization"), geothermal energy (deep drilling), values for heating/cooling and domestic hot water. Temperature maintained at 22-23°C (72-73°F) throughout.
1st image: current month and the previous 12 months 2nd image: annual balance 2017 (interior finishing still underway in January)
The past 12 months here were slightly colder than the previous year: 1700 kWh total electricity consumption for heating and hot water from March 2017 to March 2018; KfW 70 standard, built in 2014, approximately 200 m² (2150 sq ft) of heated living space (some basement rooms are not directly heated).
Similar topics