ᐅ Are there any tips for assembling the Ikea PAX wardrobe on your own?
Created on: 11 Aug 2023 09:37
A
artis
Hello everyone,
I am considering getting an Ikea PAX wardrobe but currently don’t have anyone to help me assemble it. My question is: Are there any tips, tricks, or special techniques to successfully assemble the Ikea PAX wardrobe alone?
I am mainly concerned about stability during assembly, handling the large parts, and whether there are any aids or tools that could make the process easier.
I am reasonably handy but usually only have my own two hands available and would like to know if it is realistically doable and how to best approach it.
Thanks in advance for your opinions and experiences!
I am considering getting an Ikea PAX wardrobe but currently don’t have anyone to help me assemble it. My question is: Are there any tips, tricks, or special techniques to successfully assemble the Ikea PAX wardrobe alone?
I am mainly concerned about stability during assembly, handling the large parts, and whether there are any aids or tools that could make the process easier.
I am reasonably handy but usually only have my own two hands available and would like to know if it is realistically doable and how to best approach it.
Thanks in advance for your opinions and experiences!
pikin schrieb:
For larger models, I still recommend having a second person to help at least with the standing-up process, since the stress on the components and the risk of tipping increase.Thanks for the tip, that’s really an important point.
Would you say that smaller Pax models are generally less risky to assemble alone? Specifically, I’m thinking of a width of 100 cm (39 inches) and a height of about 236 cm (93 inches).
Are there any special techniques to stand the carcass up safely without it tipping or falling?
And one more technical question: How useful are so-called assembly aids or temporary supports that can be used during the standing-up process? Does anyone know of practical solutions for this?
artis schrieb:
How useful are so-called assembly aids or temporary supports that can be used during the raising process? Does anyone know of any practical solutions?Oh yes, absolutely! I once experimented with a small folding stool and a crate to briefly lean the cabinet against while I screwed on the back panel. That was worth its weight in gold.
A cut wooden wedge or an old doorstop can also help secure parts and prevent slipping.
It may sound simple, but it really saves you stress and back pain.
Oh, and bring a music playlist with good vibes – assembling alone is quite a workout, but it goes better with a good mood 😉