ᐅ Incorrect planning of ceiling boxes in precast concrete slabs
Created on: 26 Sep 2017 12:22
T
Tranceport
Hello everyone,
I am currently having my house built by a developer (145m² (1,560 sq ft) of living space across 2 full floors plus a basement, exposed roof structure, controlled mechanical ventilation) and I have a small issue where I would really appreciate some advice:
For the ceiling boxes (LED spotlights, occupancy sensors, speakers, standard electrical boxes) in the basement and ground floor, I provided the layout, complete with all measurements and a truly (sorry) foolproof legend. Everything was also drawn to scale. These were then transferred to the ceiling plan and sent to me on a regular weekday afternoon (3 p.m.) for approval, with the expectation that I would approve them that same afternoon.
I immediately noticed two placement errors in the boxes because they were obviously drawn completely wrong in the room, even though all the other boxes are aligned. However, in the short time, I unfortunately overlooked that two incorrect boxes were also shown in the plan, even though I had specified the manufacturer including the article number. I only realized this during the on-site ceiling inspection, so now core drilling will probably be necessary.
The question here is: who covers the costs? The developer claims that since I did not correct the error and approved the plan, the fault lies with me. This is obviously true, but I do wonder why I am paying the premium for a developer, taking the stress of creating a painstakingly accurate millimeter-precise plan myself, only for such careless mistakes to occur later during the simple transfer of measurements and boxes (there are only 3 different types plus speaker enclosures...) and then I am expected to foot the bill for fixing them.
What is your opinion?
Best regards,
Tranceport
I am currently having my house built by a developer (145m² (1,560 sq ft) of living space across 2 full floors plus a basement, exposed roof structure, controlled mechanical ventilation) and I have a small issue where I would really appreciate some advice:
For the ceiling boxes (LED spotlights, occupancy sensors, speakers, standard electrical boxes) in the basement and ground floor, I provided the layout, complete with all measurements and a truly (sorry) foolproof legend. Everything was also drawn to scale. These were then transferred to the ceiling plan and sent to me on a regular weekday afternoon (3 p.m.) for approval, with the expectation that I would approve them that same afternoon.
I immediately noticed two placement errors in the boxes because they were obviously drawn completely wrong in the room, even though all the other boxes are aligned. However, in the short time, I unfortunately overlooked that two incorrect boxes were also shown in the plan, even though I had specified the manufacturer including the article number. I only realized this during the on-site ceiling inspection, so now core drilling will probably be necessary.
The question here is: who covers the costs? The developer claims that since I did not correct the error and approved the plan, the fault lies with me. This is obviously true, but I do wonder why I am paying the premium for a developer, taking the stress of creating a painstakingly accurate millimeter-precise plan myself, only for such careless mistakes to occur later during the simple transfer of measurements and boxes (there are only 3 different types plus speaker enclosures...) and then I am expected to foot the bill for fixing them.
What is your opinion?
Best regards,
Tranceport
Houses with luxury features naturally carry a higher risk of deviations from the original plans compared to standard houses. That’s life in Tel Aviv.
A few hundred euros to correct these "consequences" is a learning cost that is reasonable and doesn’t warrant complaining. Heal, heal, little goose...
https://www.instagram.com/11antgmxde/
https://www.linkedin.com/company/bauen-jetzt/
A few hundred euros to correct these "consequences" is a learning cost that is reasonable and doesn’t warrant complaining. Heal, heal, little goose...
https://www.instagram.com/11antgmxde/
https://www.linkedin.com/company/bauen-jetzt/
In such matters, I have so far spoken with the general contractor and we have always found a solution that works for both parties.
That’s why I am on the construction site twice a day. In the morning, to discuss details, and in the evening, to review everything calmly. This also helps the workers get to know me and understand how I operate.
That’s why I am on the construction site twice a day. In the morning, to discuss details, and in the evening, to review everything calmly. This also helps the workers get to know me and understand how I operate.