Ask a questionQuestion?

ᐅ How do I properly install an IKEA Metod kitchen with built-in appliances?

Created on: 24 May 2021 08:32
E
ESTEBAN
Original post
Hello everyone, I am currently planning the installation of an IKEA Metod kitchen, including built-in appliances such as the stove, oven, cooktop, dishwasher, and refrigerator. My main question is how to proceed systematically and correctly during the installation to avoid potential problems later on. Specifically, I am interested in aspects such as the proper assembly of the base cabinets, the precise positioning and mounting of the wall cabinets, the safe integration of the electrical appliances (especially regarding power and water connections), as well as tips for fine-tuning the fronts and doors. It is particularly important for me to know the recommended order of installation, the essential tools required, and what to watch out for to prevent both functional and aesthetic issues. I would greatly appreciate any helpful advice based on experience, especially concerning the handling of the built-in appliances in connection with the Metod system.
K
kemeo6825 May 2021 16:08
#7
PAR63 schrieb:
When installing the dishwasher, make sure the water and power connections are easily accessible

I always wonder if this is overrated. Sure, it makes sense in theory, but in practice, you set up the kitchen once and it runs for 10 years. Whether you can easily access the connection today or not – is that really so important?

You should also approach this topic calmly and not unnecessarily increase the effort during installation. What matters is that everything is stable and looks good.
B
blapau26 May 2021 08:37
#8
kemeo68 schrieb:
I always wonder if this is overrated.

A valid perspective, yet I believe easy access to the connections is very important in the long run. Keep in mind that dishwashers or refrigerators will eventually need to be replaced, or if a hose leaks – immediate access can be very helpful.

Another tip: During installation, it’s beneficial to work with a second person. Each step should be checked with a level before final tightening to avoid problems with assembly and adjustment later on.