ᐅ Exterior plaster/render, request for assessment and quotation
Created on: 25 Jun 2019 16:24
A
anat79Hello everyone,
we are currently obtaining quotes for the exterior plastering. Maybe someone has experience and can give an assessment whether the items and prices below are reasonable?
The items come from the bill of quantities prepared by our architect in cooperation with a plaster manufacturer. The plasterer then filled out the bill of quantities.
We are interested in whether these items are appropriate or if this is totally overpriced for a 'normal' single-family house. Our architect tends to overshoot sometimes and pushes costs up with extremely high-quality demands.
Of course, an evaluation of the plasterer’s costs would also be helpful.
The building has 300sqm (3,229 sqft) of facade surface area, flat roof. We were aware that the special color (dark red) would make it somewhat more expensive, but hmm, this expensive?...
Thank you!
Universal acrylic-based primer - 737.50
Fiber-reinforced lightweight base coat 10mm (0.4 inches) - 4,720
Additional layer of lightweight base coat 5mm (0.2 inches) - 2,507.50
Mineral reinforcing coat with fiberglass mesh - 4,130
Diagonal reinforcement - 450
Plaster base filled, watery, pigmented according to Sikkens C2.50.25 dark red - 678.50
Organic modeling plaster according to Sikkens C2.50.25 dark red - 5,310
Facade paint 2x according to Sikkens C2.50.25 dark red - 4,130
Insulation boards - 1,225.50
Sliding bearings - 430.50
Scaffolding - 1,017.50
Total net 26,236.50
we are currently obtaining quotes for the exterior plastering. Maybe someone has experience and can give an assessment whether the items and prices below are reasonable?
The items come from the bill of quantities prepared by our architect in cooperation with a plaster manufacturer. The plasterer then filled out the bill of quantities.
We are interested in whether these items are appropriate or if this is totally overpriced for a 'normal' single-family house. Our architect tends to overshoot sometimes and pushes costs up with extremely high-quality demands.
Of course, an evaluation of the plasterer’s costs would also be helpful.
The building has 300sqm (3,229 sqft) of facade surface area, flat roof. We were aware that the special color (dark red) would make it somewhat more expensive, but hmm, this expensive?...
Thank you!
Universal acrylic-based primer - 737.50
Fiber-reinforced lightweight base coat 10mm (0.4 inches) - 4,720
Additional layer of lightweight base coat 5mm (0.2 inches) - 2,507.50
Mineral reinforcing coat with fiberglass mesh - 4,130
Diagonal reinforcement - 450
Plaster base filled, watery, pigmented according to Sikkens C2.50.25 dark red - 678.50
Organic modeling plaster according to Sikkens C2.50.25 dark red - 5,310
Facade paint 2x according to Sikkens C2.50.25 dark red - 4,130
Insulation boards - 1,225.50
Sliding bearings - 430.50
Scaffolding - 1,017.50
Total net 26,236.50