E
Eigenheim_201131 May 2020 17:16Hello, we are currently planning a KfW 40+ prefabricated house in western Bavaria. We are now considering which heat pump to choose. The soil survey has apparently already been conducted by the municipality, but I have not yet received it. To be honest, I have not yet looked into the pros and cons in detail, nor the price differences, efficiency, and durability, etc.
As far as I know, there is a BAFA subsidy of 35% for heat pump systems, among other things. Does anyone know if we can receive the subsidy if the unit is purchased through the prefabricated house manufacturer (this shouldn’t be a problem, right)? Has anyone already applied for this subsidy? It seems to be quite new.
If you have any tips for the decision-making process (choosing the heat pump), I would be very grateful!
As far as I know, there is a BAFA subsidy of 35% for heat pump systems, among other things. Does anyone know if we can receive the subsidy if the unit is purchased through the prefabricated house manufacturer (this shouldn’t be a problem, right)? Has anyone already applied for this subsidy? It seems to be quite new.
If you have any tips for the decision-making process (choosing the heat pump), I would be very grateful!
Hello!
Definitely read through everything on the BAFA website, including the information sheet. Apart from the information sheet, BAFA provides a list showing which pumps are eligible for funding. However, a pump being listed does not guarantee funding; it is only a basic requirement. What ultimately determines funding is the seasonal performance factor (SPF) of the pump. For new buildings, this must be at least 4.5. This is achievable with air-source heat pumps, but not always easy.
Regarding the timing of the application, it is crucial that nothing specific has been commissioned yet. However, planning work may have already been done.
Once your application has been confirmed as received, you are allowed to place the order.
Edit: I would leave the selection to your plumber or HVAC technician. It is pointless to insist on a pump they are not familiar with, as it may then be set up incorrectly.
Definitely read through everything on the BAFA website, including the information sheet. Apart from the information sheet, BAFA provides a list showing which pumps are eligible for funding. However, a pump being listed does not guarantee funding; it is only a basic requirement. What ultimately determines funding is the seasonal performance factor (SPF) of the pump. For new buildings, this must be at least 4.5. This is achievable with air-source heat pumps, but not always easy.
Regarding the timing of the application, it is crucial that nothing specific has been commissioned yet. However, planning work may have already been done.
Once your application has been confirmed as received, you are allowed to place the order.
Edit: I would leave the selection to your plumber or HVAC technician. It is pointless to insist on a pump they are not familiar with, as it may then be set up incorrectly.
E
Eigenheim_201131 May 2020 19:25Nothing has been applied for yet. As I mentioned, we are still in the planning phase and there is a lot to consider: photovoltaic system, battery storage, heat pump, ventilation system in the house, etc. Just the BAFA subsidy comes with 6 pages of information, followed by a list of manufacturers spanning the next 106 pages.
I plan to talk to an energy consultant this week. There is also free advice available. Besides evaluating each individual component to decide what makes the most sense and what we can actually implement, the cost aspect is also important. That means obtaining quotes.
It’s strange—I didn’t get the impression that my parents had to consider so much when they built their house.
I plan to talk to an energy consultant this week. There is also free advice available. Besides evaluating each individual component to decide what makes the most sense and what we can actually implement, the cost aspect is also important. That means obtaining quotes.
It’s strange—I didn’t get the impression that my parents had to consider so much when they built their house.
K
knalltüte31 May 2020 20:36Eigenheim_2011 schrieb:
...I will speak with an energy consultant this week. There is also a free consultation available. ...Free would be nice, but that’s new to me? (Well, maybe the initial consultation / feasibility study.)
Half of the consulting costs are subsidized (maximum total costs of 8,000 euros (about 8,000 euros)). That means a maximum grant of 4,000 euros (about 4,000 euros). But an energy consultant is required for KfW40+ anyway.
We looked for an architect who is also an energy consultant and already has completed projects (KfW40+ or passive houses). Otherwise, the two would have to coordinate extensively with each other, which could lead to delays and misunderstandings.
E
Eigenheim_20111 Jun 2020 09:07Ah, okay, good to know and thanks for the tip. You’re right. A personal consultation at the advisory office (30 minutes) is free of charge, as is a basic check. All further consultations apparently cost a flat fee of 30€.
I’m still missing some information regarding the procedure. Since, as mentioned, we are building with a prefabricated house provider who already meets the KfW 40 plus standard by default, we’re not sure if we need to have an additional consultant involved or if one is provided.
Also, there’s the question about the architect. Because we are building with an external prefabricated basement, I’m not sure if this architect will calculate the overall structural engineering and create plans or if we need to work with an external architect who also serves as an energy consultant.
I will probably need to start separate threads about this.
I’m still missing some information regarding the procedure. Since, as mentioned, we are building with a prefabricated house provider who already meets the KfW 40 plus standard by default, we’re not sure if we need to have an additional consultant involved or if one is provided.
Also, there’s the question about the architect. Because we are building with an external prefabricated basement, I’m not sure if this architect will calculate the overall structural engineering and create plans or if we need to work with an external architect who also serves as an energy consultant.
I will probably need to start separate threads about this.
Similar topics