T
Tino Saurier7 Aug 2023 14:35Hello everyone,
Due to supply issues with our house builder, I took it upon myself to source the wall sensors for the roller shutter motors that have already been installed.
I have now started programming the Smoove switches. Several roller shutters are connected to one circuit breaker in my setup. This means I can control multiple shutters (guest room, living room, dining room) with a single sensor. However, I originally wanted to program one wall sensor per roller shutter.
Does anyone have a solution for this?
This feature would be especially useful in the children’s room^^.
I hope my issue is clear.
Best regards from Saxony-Anhalt
Tino
Due to supply issues with our house builder, I took it upon myself to source the wall sensors for the roller shutter motors that have already been installed.
I have now started programming the Smoove switches. Several roller shutters are connected to one circuit breaker in my setup. This means I can control multiple shutters (guest room, living room, dining room) with a single sensor. However, I originally wanted to program one wall sensor per roller shutter.
Does anyone have a solution for this?
This feature would be especially useful in the children’s room^^.
I hope my issue is clear.
Best regards from Saxony-Anhalt
Tino