Hello everyone,
I’m curious how often you use your roller shutters and how much added value they provide for you.
At the moment, we hardly ever use ours, and after renovating our house, I can’t see why that would change (especially since the energy-saving aspect will almost disappear).
So, I’m considering leaving out the roller shutters (one less thermal bridge) and instead installing decorative, non-functional shutters.
Best regards
SoL
I’m curious how often you use your roller shutters and how much added value they provide for you.
At the moment, we hardly ever use ours, and after renovating our house, I can’t see why that would change (especially since the energy-saving aspect will almost disappear).
So, I’m considering leaving out the roller shutters (one less thermal bridge) and instead installing decorative, non-functional shutters.
Best regards
SoL
M
motorradsilke16 Feb 2023 14:29Mycraft schrieb:
Not just presence detectors, that would be too inaccurate. What else?
I’m trying to imagine the technical implementation; I wouldn’t want something like that.
It is a combination of everything in the house (presence detectors and other sensors). Especially when it comes to detecting presence, you want to avoid any misinterpretation. Otherwise, for example, motorized shutters might move back and forth unnecessarily. This function is more of a side benefit since the sensors are primarily needed for other purposes and are already installed anyway (in case someone wants to build such a system). However, when properly integrated, they can be used to control the shutters intelligently.
For budget reasons, we are only having the electrical control pre-installed during our renovation of the old building and will observe for about a year whether we actually need roller shutters.
For me personally, the main argument would be protection against heat, but we’ll see how it turns out – we don’t have a single window facing south, only on the other three sides, and all the bedrooms are located on the cooler floors without sloped ceilings.
Regarding privacy, I think we have become quite accustomed to it. Currently, in our rented apartment right in the city center, every room can be seen through. You just get used to it 🙂
For me personally, the main argument would be protection against heat, but we’ll see how it turns out – we don’t have a single window facing south, only on the other three sides, and all the bedrooms are located on the cooler floors without sloped ceilings.
Regarding privacy, I think we have become quite accustomed to it. Currently, in our rented apartment right in the city center, every room can be seen through. You just get used to it 🙂
X
xMisterDx23 Feb 2023 11:53I agree with the idea for regular windows. We now have many floor-to-ceiling windows, and I find it a bit uncomfortable when anyone can look inside.
However, we will probably handle privacy more with a hedge than with roller shutters. My neighbor installed a corner window facing my side, right where his dining table is. That’s why the roller shutters there are usually down, so he can eat without being disturbed.
What nonsense. I install a very expensive corner window... and then the roller shutters are always down...
However, we will probably handle privacy more with a hedge than with roller shutters. My neighbor installed a corner window facing my side, right where his dining table is. That’s why the roller shutters there are usually down, so he can eat without being disturbed.
What nonsense. I install a very expensive corner window... and then the roller shutters are always down...
Similar topics