Hello,
We have tiles and laminate flooring installed on our ground floor. Unfortunately, no appropriate transition profiles were used at the time. This has become increasingly bothersome. The height difference is about 9mm (0.35 inches). Drilling is not an option because there is underfloor heating installed.
I am considering a profile that could be glued onto both types of flooring. The hardware store couldn’t really help me, and I didn’t find much through online searches either.
Can anyone offer advice or assistance?
Best regards
We have tiles and laminate flooring installed on our ground floor. Unfortunately, no appropriate transition profiles were used at the time. This has become increasingly bothersome. The height difference is about 9mm (0.35 inches). Drilling is not an option because there is underfloor heating installed.
I am considering a profile that could be glued onto both types of flooring. The hardware store couldn’t really help me, and I didn’t find much through online searches either.
Can anyone offer advice or assistance?
Best regards
Freedark schrieb:
A brief update after quite some time: So far, nothing has really changed for us. I got a wedge strip as a test, but we didn’t like it. By now, we are seriously considering going for the maximum solution, meaning a new floor covering...It’s not that bad if almost nothing has happened in over 1.5 years. 🙄