ᐅ Are there flexible furniture films or edge wraps available for curved corners on KALLAX units?
Created on: 12 Sep 2020 09:23
Z
zeynel61
Hello everyone,
I am currently planning to customize my IKEA KALLAX shelf a bit more individually and have therefore been considering using furniture films. My specific question is: Are there curved furniture films designed especially for the rounded corners on the KALLAX?
I know many films work well on flat surfaces, but with the KALLAX corners—which are not sharp-edged but somewhat rounded—I am unsure if there are special films that can be applied without unattractive wrinkles or air bubbles.
Has anyone had experience with films for these corners or knows of alternatives to achieve a clean finish? I would really appreciate any advice or tips, especially regarding brands or methods that have proven effective.
I am currently planning to customize my IKEA KALLAX shelf a bit more individually and have therefore been considering using furniture films. My specific question is: Are there curved furniture films designed especially for the rounded corners on the KALLAX?
I know many films work well on flat surfaces, but with the KALLAX corners—which are not sharp-edged but somewhat rounded—I am unsure if there are special films that can be applied without unattractive wrinkles or air bubbles.
Has anyone had experience with films for these corners or knows of alternatives to achieve a clean finish? I would really appreciate any advice or tips, especially regarding brands or methods that have proven effective.
G
Genevieve14 Sep 2020 08:43theota schrieb:
The expectation to receive a pre-formed, ready-made film for such a specific corner is unrealistic.I agree. Additionally, the practical benefit should be considered: even if curved or pre-formed furniture films existed, their cost-effectiveness would be questionable, since the curve on the KALLAX is not very pronounced.
Furthermore, I am missing empirical evidence that these solutions are better than the conventional method of heating and shaping. I would actually be interested to know if there are manufacturers with special solutions or if this is more of a misinformation rumor. Have there ever been studies or comparisons on this?
Just to add an analytical perspective: one evaluation criterion for films is also their durability on corners, as otherwise the film tends to peel off quickly. Therefore, the adhesive layer and the manufacturing process are more important than whether the film is pre-curved from the start.
Similar topics