ᐅ How can I install the sliding doors from Pax without affecting their functionality?

Hello everyone,

I recently purchased a Pax wardrobe from Ikea and now face the task of correctly installing the sliding doors without compromising their functionality. Specifically, I want to mount the doors so that they move smoothly and easily, without sticking or coming off the track.

Since I prefer to work independently from the instructions, it would be great if someone with experience could share useful tips on how to properly adjust and secure the sliding doors to prevent the guide rails from jamming or the door mechanism from being damaged. Are there any particular considerations regarding the choice of screws or door positioning to keep in mind?

Thank you in advance!

The doors must be precisely hung into the upper and lower tracks. Screw in the screws only lightly to avoid jamming. Afterwards, adjust the height using the adjustment screws on the door.

Hey, this works great with a little patience! 😊 The important thing is not to tighten everything completely right away. I also panicked briefly when a door was hard to move, but after some fine adjustments, everything runs smoothly! Enjoy the screwing – you can do it!

Hello,

I can explain this more precisely:

1. First, fix the upper track in place, while fitting the doors into the lower track.
2. Leave the screws slightly loose at first to allow the doors to move.
3. Use the adjustment screws on the door to set the height and the distance to the side of the cabinet.
4. Check that the doors run evenly in the track so that neither side sticks.
5. Finally, tighten all screws until snug, but no more!

Be careful not to overtighten any screws, as this can damage the material and cause loss of adjustability later.

Applying too much force can deform the track profile, causing the door to no longer operate smoothly.

Additionally, I recommend the following approach:

- Use only the original screws from the Pax assembly kit or screws with identical dimensions.
- Avoid oversized or overly long screws to prevent damaging the door frame.
- Before final fastening, open and close the door multiple times to detect any friction or sticking.
- Also check the correct installation of the rollers at the top and bottom, as they are crucial for smooth operation.

With proper installation, the sliding doors require almost no maintenance and will function reliably for many years.

mabla schrieb:
The doors must be hung precisely into the upper and lower tracks. Tighten screws only slightly to avoid jamming.

Thanks for the advice. I am particularly interested in whether the adjustment screws are positioned identically on all doors and if there are any tips on how to hang the doors properly without damaging them.

Jensson schrieb:
1. First secure the upper track, while guiding the doors into the lower track.

On which side should you start hanging the doors, and are there any techniques to make handling the relatively heavy doors easier? I’m concerned that the guide rails or door frames might get damaged.