ᐅ My Kallax unit is placed in a hallway and keeps shifting—how can I secure it?
Created on: 22 Feb 2024 18:07
M
marmu64
Hello everyone,
I have a somewhat unusual problem: my Kallax shelf is placed in a passageway, and unfortunately, it keeps shifting whenever someone passes by or there are slight vibrations. I have already tried placing felt pads underneath, but that didn’t really help. It would be great if someone could advise me on the best way to secure a Kallax shelf in this kind of situation without ruining the appearance or damaging the furniture. Are there any easy-to-install solutions or specific products you would recommend? I’m looking forward to your tips and experiences.
Thanks in advance!
I have a somewhat unusual problem: my Kallax shelf is placed in a passageway, and unfortunately, it keeps shifting whenever someone passes by or there are slight vibrations. I have already tried placing felt pads underneath, but that didn’t really help. It would be great if someone could advise me on the best way to secure a Kallax shelf in this kind of situation without ruining the appearance or damaging the furniture. Are there any easy-to-install solutions or specific products you would recommend? I’m looking forward to your tips and experiences.
Thanks in advance!
Hello,
I had a similar issue with my Kallax shelf in the hallway. Since I wanted to avoid drilling holes, I chose non-slip silicone pads that are slightly thicker than regular felt pads. This greatly increases the friction and prevents the furniture from sliding.
Additionally, I placed small rubber wedges underneath the “slippery” sides to provide extra stability. It was also important to me that the shelf remains easy to move in case I want to rearrange it later.
The effort was minimal, and visually it’s hardly noticeable. My recommendation is to combine different thicknesses of anti-slip solutions until the shelf becomes stable.
I had a similar issue with my Kallax shelf in the hallway. Since I wanted to avoid drilling holes, I chose non-slip silicone pads that are slightly thicker than regular felt pads. This greatly increases the friction and prevents the furniture from sliding.
Additionally, I placed small rubber wedges underneath the “slippery” sides to provide extra stability. It was also important to me that the shelf remains easy to move in case I want to rearrange it later.
The effort was minimal, and visually it’s hardly noticeable. My recommendation is to combine different thicknesses of anti-slip solutions until the shelf becomes stable.
I can understand how frustrating that can be. This constant shifting creates a feeling of uncertainty—especially when there’s a lot of activity in the room.
Maybe you could try placing a small rug or runner under the Kallax shelf? If the floor underneath offers a bit more grip, the shelf will move less. Of course, it’s important that no tripping hazards are created.
I hope you find a solution that feels right for you.
Maybe you could try placing a small rug or runner under the Kallax shelf? If the floor underneath offers a bit more grip, the shelf will move less. Of course, it’s important that no tripping hazards are created.
I hope you find a solution that feels right for you.
For more effective and permanent securing without drilling, furniture brackets with a tension mechanism that clamp between the ceiling and the shelf are suitable. They increase stability against tipping and sliding.
Alternatively, furniture glides with adhesive or screw fixation can be used. Inserting self-adhesive stoppers on the edges of the shelves, which then make contact with the floor or wall, is also a practical solution.
Alternatively, furniture glides with adhesive or screw fixation can be used. Inserting self-adhesive stoppers on the edges of the shelves, which then make contact with the floor or wall, is also a practical solution.
marmu64 schrieb:
I actually have concerns about fixing the shelf to the wall since the passage is open on two sides and I don’t want to make any drill holes.If drilling holes is not an option, I recommend placing the Kallax on a solid base board. This increases the footprint and lowers the center of gravity, which significantly reduces the risk of slipping. The base board simply rests underneath and can be equipped with non-slip pads.
This solution is reversible and avoids damage to the floor and walls.
nojaus schrieb:
Maybe you could also try a small rug or runner under the Kallax?That’s a sensible idea, but keep in mind that carpet fibers under furniture edges may compress with frequent use, which can lead to an uneven surface.
A combination of a rug and firm anti-slip pads might help: pads placed directly under the legs provide grip, while the rug distributes the weight and prevents the furniture from sliding directly on the smooth floor.
Similar topics