Hello everyone,
I recently bought a Malm dresser set from IKEA and want to prevent the furniture from sliding on my smooth laminate floor during everyday use, for example when opening and closing the drawers. That’s why I’m asking: What methods or materials would you recommend to securely stabilize a Malm dresser against slipping without damaging the floor or affecting its appearance? Are there any special solutions or proven tips that are also suitable for rental apartments where you cannot simply drill fixed points? Thanks in advance!
I recently bought a Malm dresser set from IKEA and want to prevent the furniture from sliding on my smooth laminate floor during everyday use, for example when opening and closing the drawers. That’s why I’m asking: What methods or materials would you recommend to securely stabilize a Malm dresser against slipping without damaging the floor or affecting its appearance? Are there any special solutions or proven tips that are also suitable for rental apartments where you cannot simply drill fixed points? Thanks in advance!
Hello FEVIK38,
your question is very clearly formulated and takes important details into account. Basically, there are several ways to prevent a Malm dresser from sliding, especially on smooth floors.
1. Non-slip pads or felt gliders with a rubber coating: These are small pads attached under the furniture legs to improve grip.
2. Furniture stoppers (usually made of plastic or rubber): These can be wedged between the furniture and the wall, preventing sliding while still being easy to remove.
3. Hook-and-loop straps or double-sided tape: Especially practical for rental apartments, as they usually do not damage the floor.
4. Non-slip mats: Place a non-slip mat under the dresser (e.g., rug underlay).
Be cautious with strong adhesives, as some glues may leave residues. For a permanent solution, you can of course screw the dresser to the wall—there are wall fastening kits available for this purpose.
I hope this helps you!
your question is very clearly formulated and takes important details into account. Basically, there are several ways to prevent a Malm dresser from sliding, especially on smooth floors.
1. Non-slip pads or felt gliders with a rubber coating: These are small pads attached under the furniture legs to improve grip.
2. Furniture stoppers (usually made of plastic or rubber): These can be wedged between the furniture and the wall, preventing sliding while still being easy to remove.
3. Hook-and-loop straps or double-sided tape: Especially practical for rental apartments, as they usually do not damage the floor.
4. Non-slip mats: Place a non-slip mat under the dresser (e.g., rug underlay).
Be cautious with strong adhesives, as some glues may leave residues. For a permanent solution, you can of course screw the dresser to the wall—there are wall fastening kits available for this purpose.
I hope this helps you!
Hello everyone,
I would like to go into a bit more technical detail here, as I have already tried various fastening methods myself.
First, you should carefully examine the floor surface: Laminate is often smooth and prone to scratches, so a scratch-free method—as already mentioned by benon—is advisable.
My recommendation:
Step 1: Cleaning
Before fastening, make sure to thoroughly clean and degrease the floor and the underside of the dresser to ensure that adhesive pads or strips will adhere permanently.
Step 2: Choosing the glides
I like to use high-quality non-slip pads made from a rubber compound that can be stuck onto the furniture legs or casters. These provide good grip and leave no residue. Note: The size and material must match the dresser to avoid any marks.
Step 3: Additional securing
If the distance to the wall is suitable, the dresser can be fixed to the wall using special furniture brackets and screws. IKEA often supplies metal brackets that can be screwed into the corners and anchored to the wall.
Keep in mind:
Wall fastening is the most stable solution against shifting and tipping, but it requires small drill holes. In a rental apartment, it might be a compromise—for example, drill holes directly behind furniture that can be filled in when moving out.
If you prefer a drill-free option, it’s best to combine non-slip pads with a non-slip rug underlay beneath the dresser. This combination usually provides much better grip than either method alone.
I hope this helps clarify things a bit.
I would like to go into a bit more technical detail here, as I have already tried various fastening methods myself.
First, you should carefully examine the floor surface: Laminate is often smooth and prone to scratches, so a scratch-free method—as already mentioned by benon—is advisable.
My recommendation:
Step 1: Cleaning
Before fastening, make sure to thoroughly clean and degrease the floor and the underside of the dresser to ensure that adhesive pads or strips will adhere permanently.
Step 2: Choosing the glides
I like to use high-quality non-slip pads made from a rubber compound that can be stuck onto the furniture legs or casters. These provide good grip and leave no residue. Note: The size and material must match the dresser to avoid any marks.
Step 3: Additional securing
If the distance to the wall is suitable, the dresser can be fixed to the wall using special furniture brackets and screws. IKEA often supplies metal brackets that can be screwed into the corners and anchored to the wall.
Keep in mind:
Wall fastening is the most stable solution against shifting and tipping, but it requires small drill holes. In a rental apartment, it might be a compromise—for example, drill holes directly behind furniture that can be filled in when moving out.
If you prefer a drill-free option, it’s best to combine non-slip pads with a non-slip rug underlay beneath the dresser. This combination usually provides much better grip than either method alone.
I hope this helps clarify things a bit.
Interesting thread!
I would like to point out that when using anti-slip pads, it is essential to pay attention to their chemical composition. Sometimes products contain plasticizers that can damage or discolor laminate flooring over time. I recommend choosing tested materials that are specifically designed for sensitive floor finishes.
Although wall mounting is often mentioned as the safest method, the purpose should be carefully considered. Not every dresser poses a real safety risk when pushed; often, simply improving the friction between the furniture and the floor is sufficient.
What I’m still curious about: How big is the sliding problem for you, FEVIK38? Is the dresser easy to move, or does it slide even with minimal contact? The extent of the problem greatly influences which securing method is appropriate.
I would like to point out that when using anti-slip pads, it is essential to pay attention to their chemical composition. Sometimes products contain plasticizers that can damage or discolor laminate flooring over time. I recommend choosing tested materials that are specifically designed for sensitive floor finishes.
Although wall mounting is often mentioned as the safest method, the purpose should be carefully considered. Not every dresser poses a real safety risk when pushed; often, simply improving the friction between the furniture and the floor is sufficient.
What I’m still curious about: How big is the sliding problem for you, FEVIK38? Is the dresser easy to move, or does it slide even with minimal contact? The extent of the problem greatly influences which securing method is appropriate.
Josefane schrieb:
How big is the sliding problem for you, FEVIK38?Thanks for the hint, Josefane! The dresser mainly shifts when opening the large drawers because the structure is quite light. When pulling them out, I sometimes get the impression that it moves by a few centimeters (inches), which is annoying. Although it doesn’t require much force, it is noticeable enough to stress the laminate floor and make the dresser seem unstable.
Therefore, I’m looking for a solution that can be installed easily, leaves no visible marks, and protects the floor. I want to consider drilling into the wall only as a last resort since I live in a rental apartment.
Does anyone have experience with combined solutions, for example anti-slip pads plus a rug underlay or something similar? Are there any issues to watch out for, such as abrasion caused by movement on the underlay?
For clarification:
The combination of anti-slip pads and a rug underlay is indeed a proven method, especially for furniture on smooth surfaces like laminate flooring. It is important to keep the following points in mind:
- Quality of anti-slip pads: Choose pads with good adhesion and a soft surface that won’t leave marks. Silicone-based pads are often a good choice.
- The rug underlay should be made of a special non-slip material, usually rubber or latex, and should not be glued directly to the laminate. It acts as a buffer and prevents direct slipping.
- Abrasion is generally minimal as long as the dresser is not moved frequently. If the dresser is moved more often, abrasion can increase and may eventually damage the mat.
- It is important to regularly clean the area under the dresser to prevent dirt particles from accumulating, which could damage the mat or reduce its grip.
In summary: This combination effectively protects both the dresser and the floor from shifting and damage. Additionally, it is reversible and suitable for rental properties.
If you would like further details about specific product choices or installation, feel free to ask.
The combination of anti-slip pads and a rug underlay is indeed a proven method, especially for furniture on smooth surfaces like laminate flooring. It is important to keep the following points in mind:
- Quality of anti-slip pads: Choose pads with good adhesion and a soft surface that won’t leave marks. Silicone-based pads are often a good choice.
- The rug underlay should be made of a special non-slip material, usually rubber or latex, and should not be glued directly to the laminate. It acts as a buffer and prevents direct slipping.
- Abrasion is generally minimal as long as the dresser is not moved frequently. If the dresser is moved more often, abrasion can increase and may eventually damage the mat.
- It is important to regularly clean the area under the dresser to prevent dirt particles from accumulating, which could damage the mat or reduce its grip.
In summary: This combination effectively protects both the dresser and the floor from shifting and damage. Additionally, it is reversible and suitable for rental properties.
If you would like further details about specific product choices or installation, feel free to ask.
Similar topics