ᐅ How can I securely mount IKEA Metod cabinets on different types of walls?

Hello everyone,

I am planning to install some IKEA Metod kitchen cabinets on my walls. I have encountered different wall types: for example, solid brick, drywall partitions, and partly concrete walls. My specific question is: how can I securely and permanently fix IKEA Metod cabinets to these various wall types?

What fastening materials and techniques are best suited to ensure a safe installation, so that the cabinets do not fall down after some time or damage the wall?

I look forward to helpful tips, especially regarding recommended anchors, screws, and practical mounting systems for each type of wall. Thanks in advance!

Basically, when mounting IKEA Metod cabinets, the wall structure is the key factor in choosing the appropriate anchors and screws.

- For solid brick walls, heavy-duty nylon or metal anchors that grip deeply into the masonry are suitable. You should use anchors of at least 8 mm (0.3 inches) diameter and screws that are long enough to securely fasten the cabinet.

- For drywall (plasterboard) walls, the main challenge is load capacity. Here, I recommend special hollow wall anchors that expand behind the panel, such as toggle bolts or spring toggle anchors. The anchors must be rated for the weight of the fully loaded cabinet, and it is best to install a mounting plate or a support timber behind the drywall for added strength.

- Concrete walls generally provide good conditions for metal screw anchors or chemical anchors (injection mortar), allowing the cabinet to be firmly secured.

In all cases, it is important to follow the Metod system’s fastening points and to distribute the load as evenly as possible.

Additionally: For lightweight partition walls, it is always better, if possible, to locate the substructure (wood or metal studs) behind the drywall and screw directly into it. Using anchors designed solely for hollow cavities provides only limited load capacity.

For the fastening process, screws with metric threads that match the anchors are ideal.

Regarding the mounting technique of a Metod cabinet:
- Cabinets should be secured and aligned before installation.
- Use suitable mounting hardware from the IKEA system, which may need to be replaced or supplemented with appropriate screws or anchors.

Always check with a cable detector before drilling to avoid damaging electrical cables or pipes.

For brick walls: 8mm nylon anchors + 6mm screws, at least 60mm (2.4 inches) long.

For drywall: cavity anchors, preferably toggle bolts or metal snap toggle anchors.

For concrete: metal screw anchors or expansion bolts.

Secure the cabinet additionally with a mounting plate, if possible.

tra_nina schrieb:
The biggest challenge with drywall is its load-bearing capacity. I recommend using special hollow wall anchors that expand behind the board, such as toggle bolts or spring toggle anchors.

I agree with this but would like to add that for especially heavy cabinets or larger combinations, it makes sense to install an additional mounting rail or aluminum profile behind the walls. Cabinets can then be securely screwed to this, as the load is distributed over a larger area.

Furthermore, when working with drywall, you should always check the maximum load capacity of the anchors and ideally support the cabinets not only on one wall but also with additional support, for example from the ceiling or the floor.

For concrete, I always use chemical anchors—they hold extremely securely. Blow out the drill hole, insert the resin, then the anchor—anything else is often not sufficient.

For brick masonry, classic plastic anchors are enough. Important: make sure they fit precisely, no oversized drill holes.

Drywall is tricky: aim for the studs, either wood or metal, and set the anchors into them.