ᐅ Is there sinus-shaped adhesive tape available for retrofitting the back panel of the KALLAX?
Created on: 21 Jan 2024 07:38
T
tedalauHello everyone,
I recently bought a Kallax shelf unit and now want to upgrade the back panel because the thin cardboard backing doesn’t seem very stable and doesn’t look very good. I’ve heard about something called “sinus adhesive tape” as a special solution that is flexible and robust enough to reinforce the back panel of the Kallax afterwards, similar to a type of corrugated tape that adapts to the structure.
My specific question is: Is sinus adhesive tape available as an upgrade for the back panel of the Kallax shelf? If so, where can it be purchased and how easy is it to work with? If not, which alternative products or methods would you recommend to make the back panel more stable while maintaining a clean surface?
I look forward to your experiences and advice!
I recently bought a Kallax shelf unit and now want to upgrade the back panel because the thin cardboard backing doesn’t seem very stable and doesn’t look very good. I’ve heard about something called “sinus adhesive tape” as a special solution that is flexible and robust enough to reinforce the back panel of the Kallax afterwards, similar to a type of corrugated tape that adapts to the structure.
My specific question is: Is sinus adhesive tape available as an upgrade for the back panel of the Kallax shelf? If so, where can it be purchased and how easy is it to work with? If not, which alternative products or methods would you recommend to make the back panel more stable while maintaining a clean surface?
I look forward to your experiences and advice!
Hello tedalau,
regarding your question about sinus adhesive tape for the back panel of the KALLAX:
I am not aware of any specific sinus adhesive tape sold specifically for this application. Often, “sinus tape” refers to an elastic corrugated tape that helps with tension and compensates for unevenness. For the KALLAX, a thin hardboard or fiberboard panel is normally used as the back, which is fixed using standard installation methods.
If you want to improve stability, there are a few common approaches:
1. Cut additional back panels from thin plywood or MDF and screw or glue them in place.
2. Attach reinforcing profiles made of aluminum or wooden strips on the inside.
3. Use special sealing or adhesive tapes, but not sinus adhesive tapes supplied as ready-made products for this exact purpose.
If the goal is better appearance, you could also use a thin cork or felt panel as a surface layer.
In the end, your question is understandable, but the special term “sinus adhesive tape” is probably a misunderstanding or confusion with other professional tapes used in construction.
I hope this already helps you.
regarding your question about sinus adhesive tape for the back panel of the KALLAX:
I am not aware of any specific sinus adhesive tape sold specifically for this application. Often, “sinus tape” refers to an elastic corrugated tape that helps with tension and compensates for unevenness. For the KALLAX, a thin hardboard or fiberboard panel is normally used as the back, which is fixed using standard installation methods.
If you want to improve stability, there are a few common approaches:
1. Cut additional back panels from thin plywood or MDF and screw or glue them in place.
2. Attach reinforcing profiles made of aluminum or wooden strips on the inside.
3. Use special sealing or adhesive tapes, but not sinus adhesive tapes supplied as ready-made products for this exact purpose.
If the goal is better appearance, you could also use a thin cork or felt panel as a surface layer.
In the end, your question is understandable, but the special term “sinus adhesive tape” is probably a misunderstanding or confusion with other professional tapes used in construction.
I hope this already helps you.
klo61 schrieb:
Such special sinus adhesive tape, specifically sold for this application, is not known to me.I can confirm that. There is no special sinus adhesive tape for the KALLAX. Just cut a thin MDF board and fasten it from the inside; that holds more securely.
Hello everyone,
I would like to add a few tips to the previous answers for anyone wanting to retrofit the back panel of their KALLAX and looking for a simple and long-lasting solution.
1. Material selection:
If you want to make the back panel more stable, instead of using particleboard, consider a thin hardboard or MDF panel in the range of 3-5 mm (0.1-0.2 inches) thickness, cut slightly larger so it fits perfectly.
2. Attachment:
Use double-sided mounting tape or small breakaway adhesive clips for an invisible fix, alternatively screws with cover caps.
3. Edge protection and surface finish:
If you also want to improve the appearance of the back panel, you can treat the material with wood veneer or spray foil. Another option is so-called “corrugated tape,” which can be shaped like a fold to adapt to the grooves of the frame. The sinus adhesive tape you mentioned seems to be derived from this but is mostly used in industrial applications.
4. Caution with adhesives:
Some adhesives can damage the material, so test on an inconspicuous spot before applying.
Summary:
The idea of a special sinus adhesive tape does not exist as a specific product for KALLAX. Thin MDF or hardboard panels combined with suitable bonding methods provide cleaner support and appearance.
If you have any further questions, feel free to ask!
I would like to add a few tips to the previous answers for anyone wanting to retrofit the back panel of their KALLAX and looking for a simple and long-lasting solution.
1. Material selection:
If you want to make the back panel more stable, instead of using particleboard, consider a thin hardboard or MDF panel in the range of 3-5 mm (0.1-0.2 inches) thickness, cut slightly larger so it fits perfectly.
2. Attachment:
Use double-sided mounting tape or small breakaway adhesive clips for an invisible fix, alternatively screws with cover caps.
3. Edge protection and surface finish:
If you also want to improve the appearance of the back panel, you can treat the material with wood veneer or spray foil. Another option is so-called “corrugated tape,” which can be shaped like a fold to adapt to the grooves of the frame. The sinus adhesive tape you mentioned seems to be derived from this but is mostly used in industrial applications.
4. Caution with adhesives:
Some adhesives can damage the material, so test on an inconspicuous spot before applying.
Summary:
The idea of a special sinus adhesive tape does not exist as a specific product for KALLAX. Thin MDF or hardboard panels combined with suitable bonding methods provide cleaner support and appearance.
If you have any further questions, feel free to ask!
To complement the previous assessments:
The term “Sinus adhesive tape” does not exist as an official product in the portfolio of major furniture or DIY brands. It is occasionally referred to in technical fields as corrugated adhesive or flexible sealing tape but is unsuitable for the KALLAX back panel.
A more recommended solution is the use of hardboard panels (MDF or HDF) with a thickness of 3 mm (0.12 inches). These are affordable, easy to work with, and much more stable compared to the thin back panels of IKEA shelves.
Sources for these materials include hardware stores or online suppliers specializing in wood-based panels. For attachment, double-sided mounting tape or small screws are advisable. This ensures a secure fit without compromising the shelf’s stability.
Conclusion: There is no specific Sinus adhesive tape available for retrofitting the back panel. Alternative materials and fastening methods are more realistic and proven in practice.
The term “Sinus adhesive tape” does not exist as an official product in the portfolio of major furniture or DIY brands. It is occasionally referred to in technical fields as corrugated adhesive or flexible sealing tape but is unsuitable for the KALLAX back panel.
A more recommended solution is the use of hardboard panels (MDF or HDF) with a thickness of 3 mm (0.12 inches). These are affordable, easy to work with, and much more stable compared to the thin back panels of IKEA shelves.
Sources for these materials include hardware stores or online suppliers specializing in wood-based panels. For attachment, double-sided mounting tape or small screws are advisable. This ensures a secure fit without compromising the shelf’s stability.
Conclusion: There is no specific Sinus adhesive tape available for retrofitting the back panel. Alternative materials and fastening methods are more realistic and proven in practice.
W
warrenka5723 Jan 2024 18:03tedalau schrieb:
I have heard about “sinus adhesive tape” as a special solution that is flexible and strong enough to reinforce the back panel of the KALLAX afterwards, similar to a kind of corrugated tape that adapts to the structure.I completely understand that you’re looking for a simple yet effective solution. The back panels of the KALLAX are indeed very thin and feel somewhat fragile. Although there is no specific sinus adhesive tape available, I can encourage you that with basic materials and a bit of skill, a noticeable improvement is possible.
KUDAISY schrieb:
The sinus adhesive tape you mentioned seems to be derived from that idea but is only used in industrial applications.Yes, that sounds plausible. Sometimes such terms arise from hearsay or poor translations. Perhaps you heard about it from a retailer who just wanted a sturdy adhesive solution.
If you decide to use alternatives like MDF panels, I would recommend sealing the edges well to prevent moisture from penetrating. This will increase durability.
I hope you find a product that truly helps you and supports you in stabilizing. 🙂
Similar topics