Hello everyone,
I have an Ikea Metod kitchen cabinet door that has recently started squeaking quite a bit when opening and closing. The door is relatively new, but I suspect the issue is somewhere in the hinge. My specific question is: How do I properly fix a squeaking Ikea Metod door without removing the door and risking damage to the hinge? Are there any special tools or lubricants that work particularly well? What is the best way to proceed to ensure the squeaking stops long-term and doesn’t come back after a few days?
I would appreciate any detailed instructions and tips!
I have an Ikea Metod kitchen cabinet door that has recently started squeaking quite a bit when opening and closing. The door is relatively new, but I suspect the issue is somewhere in the hinge. My specific question is: How do I properly fix a squeaking Ikea Metod door without removing the door and risking damage to the hinge? Are there any special tools or lubricants that work particularly well? What is the best way to proceed to ensure the squeaking stops long-term and doesn’t come back after a few days?
I would appreciate any detailed instructions and tips!
Hey Blafe! Great that you are approaching this topic so thoroughly. I’ve always used a PTFE spray on my Metod doors. It’s dry, doesn’t attract dirt, and is extremely durable. Just spray a little onto the hinges, and the squeaking noises disappear! I would recommend cleaning the joints well beforehand to ensure the spray lasts optimally.
Give it a try, it’s been working for me for years! Good luck!
Give it a try, it’s been working for me for years! Good luck!
M
matthewon2 Jul 2015 09:24GLALEO schrieb:
I always used a PTFE spray on my Metod doors.Interesting, PTFE does sound sophisticated, but honestly – aren’t these sprays mostly just an expensive gimmick? I believe using a classic WD-40 achieves the same effect and saves money. All that specialized stuff is often just marketing!
Besides, the root cause of squeaking usually runs deeper – it’s often not just the hinges, but also the slight warping of the door due to moisture. As long as these causes aren’t addressed, even the best lubricant won’t provide a lasting solution.
What are your thoughts?
matthewon schrieb:
I think using a classic WD-40 gives the same effect and saves money.WD-40 is a good product with many uses, but I wouldn’t fully recommend it as a long-term solution for squeaky hinges. WD-40 is more of a penetrating oil and moisture displacer, but it’s not a long-lasting lubricant and can evaporate over time. That’s why the squeaking often returns.
matthewon schrieb:
All this specialty stuff is often just marketing!It’s true that some specialty products are mostly marketing, but PTFE-based lubricants in particular are known in the furniture and hinge sector to attract less dust and therefore last longer than regular oils.
matthewon schrieb:
Besides, you really have to look deeper for the cause of squeaking – it’s often not just the hinges, but also slight warping of the door due to moisture.That’s an important point! A misaligned or warped door can put pressure on the hinge, causing unusual noises. Therefore, the alignment should always be checked before lubricating – the Metod hinge screws have small adjustment options that allow you to move the door slightly horizontally, vertically, and in depth.
Conclusion: Combine proper adjustment with gentle cleaning and a high-quality lubricant, depending on your budget and availability.
Similar topics