ᐅ How can I combine Ikea PLATSA with PAX?

Hello everyone,

I am planning to install a new storage system at home and came across the Ikea Platsa and Pax series. I have a question: How can I effectively combine the flexible, modular Platsa units with the classic Pax wardrobes to optimize both storage space and aesthetics?

I am especially interested in whether there are specific connection methods or adapters from Ikea to securely link the two systems together. It would also be helpful to know how to harmonize the different depths and heights of the modules and what design options this creates.

Has anyone had experience with this, or are there proven concepts to combine the versatility of Platsa with the reliable Pax wardrobe system?

Thanks in advance!

There are no official adapters from Ikea to combine PLATSA and PAX. However, you can connect them using brackets or custom-made connectors. It is important to measure the exact dimensions of each cabinet, so you can adjust the heights accordingly. PLATSA is more flexible but not as deep as PAX, which you should consider during assembly.

Regarding the question about combining PLATSA and PAX: Both are modular systems, but they differ in dimensions, construction, and load capacity. PAX wardrobes are deeper (about 58 cm (23 inches) standard) and more robust, while PLATSA is designed with a depth of around 35 cm (14 inches) for more flexible room layouts.

- Connection methods: Since Ikea does not offer standardized connectors for these, a custom solution is recommended using sturdy metal brackets, screw connectors, or even wooden slats to secure the modules internally. It's important to ensure that no stress or tilting occurs due to the different depths.

- Height adjustment: PLATSA can be configured quite freely in height and width, whereas PAX comes in standard sizes that may need slight modifications (e.g., with plinths or top molding).

- Visual harmony: If the fronts differ, continuity can be achieved using full-length doors, matching handles, or special trim.

I would be interested to know your room layout and whether the combination is planned, for example, in a corner or as a room divider. The intended use (clothing, books, electronics) is also an important factor.

pa-wolf schrieb:
There are no official adapters from Ikea to combine PLATSA and PAX.

That is correct, but I do not see this disadvantage as a major issue. Both systems can be arranged very well next to or on top of each other, for example by using the taller PAX wardrobes as a base and placing PLATSA elements on or beside them as shelving units.

Domau0 schrieb:
The intended use (clothing, books, electronics) also matters.

This is very important, as PAX is well suited for hanging clothes and heavier loads, while PLATSA offers more flexible storage options for open or closed units.

I would recommend visualizing the combination in advance using Ikea’s online planners. Pay attention to color matching of the modules, as there are differences in surface finishes. Also, a shared back panel is often not possible, but you can compensate for this with cover panels.

As an addition: Technically, the combination is possible but requires careful planning.

- Dimensions: Plan according to the exact measured dimensions of both systems, which are usually different. PAX is generally significantly deeper and heavier.
- Connections: Use sturdy metal brackets, preferably inside the modules, to avoid stress points. Screws should be placed to prevent the furniture from drifting apart later.
- Surfaces: Color and material differences exist, as PAX usually has matte painted doors, while PLATSA often features melamine surfaces. This affects the overall appearance.
- Height: If you place PLATSA on top of PAX, consider the overall stability and make sure everything is properly secured to the wall.

Basically, I recommend clearly separating functions and load: heavy clothing in the PAX, lighter storage in the PLATSA. Question: What is the size of your room, and will the furniture be free-standing or placed against a wall?

pikin schrieb:
Clarification: What is the size of your room, and are you placing the furniture free-standing or against the wall?

This information is crucial for appropriate recommendations.

Additionally, when using PLATSA with PAX as a room divider, it is advisable to cover the backs of the PAX units with panels from the PLATSA range, as PAX usually has a basic back panel that remains visible. This also results in a more uniform appearance.

Moreover, for floor-standing units, this provides increased stability by allowing additional connections between the modules. If Nesoku plans to attach a clothes rail to PLATSA, please note that its load capacity is lower.