ᐅ Which fasteners are included in the IKEA Brimnes assembly kit?

Hello everyone, I have a specific question about the IKEA Brimnes assembly kit: Which fasteners—that is, the exact types and sizes of screws, wall plugs, and similar connectors—are typically included in this set? I am interested not only in the quantities but also in the precise types, such as wood screws, particleboard screws, or other specialized screws needed for the assembly. Since some components have varying stability requirements, a detailed overview would be very helpful, especially to prepare for or replace any missing parts. Additionally, I would like to know if the set uses special connection solutions beyond standard screws, for example cam locks, and if there are any particular details to keep in mind during assembly. Thank you in advance for your expertise!

For a precise answer: The IKEA Brimnes assembly kit mainly includes the following types of screws and connectors:

- Chipboard screws of various lengths, mostly 16 mm (0.6 inches) and 25 mm (1 inch)
- Metal screws for the metal fittings
- Cam locks (also called cam connectors) for secure panel connections
- Plastic dowels that fit into pre-drilled holes
- A unique feature is the folding dowels, which are often used in IKEA furniture for reinforcement

These components are carefully coordinated, so no extra screws should be needed as long as the set is complete. A special note: The cam locks provide the necessary stability for cross joints and are typical for IKEA furniture. It is worth paying close attention to the correct alignment and tightening during assembly.

In short: Brimnes uses chipboard screws, cam locks, and appropriate dowels. No special screws are required.

I would like to add a small assembly tip: When putting together the Brimnes set, the cam locks and their screws are often the critical point. They typically use screws with a serrated shaft to ensure better grip inside the cam lock.

Common mistakes I often see:
- Cam lock screws not screwed in deep enough, which causes the whole connection to loosen
- Dowels inserted incorrectly or too loosely, leading to misalignment

My advice: Always apply a bit more pressure when tightening, but not too much to avoid damaging the material. The screws should always reach their full intended depth.

Summary: The fasteners in the Brimnes kit mainly consist of chipboard screws, cam lock screws, and matching plastic dowels. The set is well thought out for DIYers; only careful assembly makes the difference.

The most important thing: Camlocks and chipboard screws are included in the kit. You won’t need any additional screws.

mifra schrieb:

These components are precisely matched so that no additional screws should be necessary, as long as the set is complete.

This is an important point, but what would be your recommendation if parts are missing due to quality issues or loss? Are there comparable replacement parts that can be used without concern, or could that quickly lead to problems?

I ask because some IKEA kits are quite restrictive regarding replacement parts, which can already affect stability. Are there any experiences regarding whether standard wood screws can be used as substitutes, or do differences in threading pose a safety risk?