ᐅ How can I avoid damage to the Malm nightstand during a move?
Created on: 21 Oct 2016 10:13
J
JANBRYANHello everyone,
I am about to move and am concerned about my Malm nightstand from Ikea. Although it is sturdy, the painted surface and particleboard material make it vulnerable to scratches and dents. My question is: How can I effectively prevent damage to the Malm nightstand during the move, especially during transport and handling? What specific protective measures or packing tips would you recommend to avoid scratches, scuffs, and possible structural damage?
I appreciate detailed, practical advice that will help me get the nightstand to the new home in the best possible condition. Thank you!
I am about to move and am concerned about my Malm nightstand from Ikea. Although it is sturdy, the painted surface and particleboard material make it vulnerable to scratches and dents. My question is: How can I effectively prevent damage to the Malm nightstand during the move, especially during transport and handling? What specific protective measures or packing tips would you recommend to avoid scratches, scuffs, and possible structural damage?
I appreciate detailed, practical advice that will help me get the nightstand to the new home in the best possible condition. Thank you!
An effective way to prevent damage to the Malm nightstand is to completely disassemble the shelves and drawers before transport.
Then wrap the main body with blankets or bubble wrap and secure it further with painter’s tape to prevent shifting. Corners and edges are especially vulnerable – here, applying corner protectors made of foam or cardboard is recommended.
The furniture should ideally be transported in an upright position rather than lying flat, as this can affect its stability. It should also be well secured in the transport vehicle to prevent sliding and impacts. A simple tip is to place moving blankets underneath the nightstand to avoid contact with rough surfaces on the floor.
Then wrap the main body with blankets or bubble wrap and secure it further with painter’s tape to prevent shifting. Corners and edges are especially vulnerable – here, applying corner protectors made of foam or cardboard is recommended.
JANBRYAN schrieb:
How can I effectively avoid damage to the Malm nightstand during a move, especially while transporting and carrying it?
The furniture should ideally be transported in an upright position rather than lying flat, as this can affect its stability. It should also be well secured in the transport vehicle to prevent sliding and impacts. A simple tip is to place moving blankets underneath the nightstand to avoid contact with rough surfaces on the floor.
Hello,
I would like to add that disassembling the drawers of Ikea furniture, such as the Malm nightstand, not only reduces the weight but also prevents damage from movement. The drawers can be packed separately and secured with padding material to avoid sliding around and causing scratches during transport.
It is also advisable to clean the nightstand before packing. Dust and small particles can scratch the finish when moving the piece.
That is correct – it might take a bit more effort, but it definitely protects the construction. If possible, use stretch wrap as well, which provides good protection against moisture and abrasion.
One more tip: Be careful not to attach or place sharp objects directly on the nightstand, as this is a common mistake during furniture transport.
Hope this helps!
I would like to add that disassembling the drawers of Ikea furniture, such as the Malm nightstand, not only reduces the weight but also prevents damage from movement. The drawers can be packed separately and secured with padding material to avoid sliding around and causing scratches during transport.
It is also advisable to clean the nightstand before packing. Dust and small particles can scratch the finish when moving the piece.
mifra schrieb:
The furniture should ideally be transported upright and not lying down, as this can affect its stability.
That is correct – it might take a bit more effort, but it definitely protects the construction. If possible, use stretch wrap as well, which provides good protection against moisture and abrasion.
One more tip: Be careful not to attach or place sharp objects directly on the nightstand, as this is a common mistake during furniture transport.
Hope this helps!
I am a bit more critical on this topic: While the tips mentioned by mifra and Brian are sensible, many people underestimate the structural weaknesses of particle board furniture during moves.
Here I wonder if that is always helpful. Especially if you don’t have optimal cushioning materials, the movement might actually damage the drawers. Sometimes securing them with tape is better to keep the ‘small parts’ together.
Also, the use of tape or other fasteners on the finish can cause peeling or adhesive residues if applied incorrectly. This should be taken into consideration.
Good and correct advice, but I would additionally pay attention to the condition of the corner protectors, as cheap or worn-looking protectors wear out quickly.
My question to everyone here: Do you have experience with professional moving companies that specifically take particle board furniture into account? I imagine they might use different techniques or materials that are not so easily accessible to individuals. Maybe this could enrich the discussion and offer an alternative.
Brian schrieb:
Drawers can be packed separately and secured with cushioning material to prevent them from sliding around and causing scratches during transport.
Here I wonder if that is always helpful. Especially if you don’t have optimal cushioning materials, the movement might actually damage the drawers. Sometimes securing them with tape is better to keep the ‘small parts’ together.
Also, the use of tape or other fasteners on the finish can cause peeling or adhesive residues if applied incorrectly. This should be taken into consideration.
mifra schrieb:
Applying corner protectors made of foam or cardboard is recommended.
Good and correct advice, but I would additionally pay attention to the condition of the corner protectors, as cheap or worn-looking protectors wear out quickly.
My question to everyone here: Do you have experience with professional moving companies that specifically take particle board furniture into account? I imagine they might use different techniques or materials that are not so easily accessible to individuals. Maybe this could enrich the discussion and offer an alternative.
Similar topics