I have decided to repaint my Malm furniture from IKEA because I no longer like the white finish. Could someone please explain in detail the best way to proceed to achieve a good, even result? I am especially interested in the preparation steps, which types of paint or finishes are suitable, and if there are any special techniques for the surface. I would also appreciate advice on whether I should disassemble the furniture or if it can be painted as a whole. Thanks in advance!
In addition to the previous discussion: The surface of Malm furniture is generally challenging for painting because it is melamine-coated. Therefore, using a primer specifically designed for plastics is important. Thin, multiple layers of paint are necessary to prevent cracking. Furthermore, painting should be done at appropriate temperatures and humidity levels, ideally around 20°C (68°F) and 50% relative humidity.
CARLA schrieb:
The surface of Malm furniture is generally challenging for painting because it is melamine-coated. Thank you for the advice, I wasn’t aware of that. Should I therefore avoid using regular wood paint and instead use a special plastic paint? If so, can you or someone else recommend a specific product type or brand? I want to avoid buying the wrong paint.
Yes, exactly. Because of the melamine-coated surface, a paint formulated for plastics is suitable. A two-component polyurethane (2K PU) paint or a special acrylic plastic paint works well. Brands like 'Hammerite' or 'Kreidezeit' offer suitable products that adhere well and provide good coverage. It is also important to use an appropriate adhesion primer approved for plastics before painting.
mudeo schrieb:
So should I avoid using regular wood lacquer and instead use a special synthetic lacquer? I would confirm that. Regular wood lacquers usually do not adhere well to melamine-coated surfaces. Using a special synthetic bonding primer plus a suitable lacquer is definitely more reliable. If you can disassemble the furniture pieces, I recommend at least treating the fronts separately, as this allows much better control and helps prevent runs caused by hard-to-reach areas.
Similar topics