ᐅ How can I optimize the installation of IKEA Metod cabinets under sloped ceilings?
Created on: 30 Oct 2017 09:37
T
TinkarHello everyone,
I am currently planning my new kitchen project and have chosen the IKEA Metod cabinet system. Since my kitchen is located under a sloping roof, I am facing some challenges during the planning phase. My question to the community is: How do you optimize the installation of IKEA Metod cabinets under sloped ceilings so that the available space is used as efficiently as possible while the cabinets remain stable and functional? I would like to make as few modifications to the cabinets myself as possible, but still want to be flexible enough to accommodate the slope. Are there any proven adjustments or tips that have worked well for you in such cases? I am especially interested in how you have adapted or supplemented the cabinets, whether you used special side panels, custom cuts, or tailored solutions, and how you handled the installation under the slope. Thanks in advance for your experiences and advice!
I am currently planning my new kitchen project and have chosen the IKEA Metod cabinet system. Since my kitchen is located under a sloping roof, I am facing some challenges during the planning phase. My question to the community is: How do you optimize the installation of IKEA Metod cabinets under sloped ceilings so that the available space is used as efficiently as possible while the cabinets remain stable and functional? I would like to make as few modifications to the cabinets myself as possible, but still want to be flexible enough to accommodate the slope. Are there any proven adjustments or tips that have worked well for you in such cases? I am especially interested in how you have adapted or supplemented the cabinets, whether you used special side panels, custom cuts, or tailored solutions, and how you handled the installation under the slope. Thanks in advance for your experiences and advice!
Hi Tinkar,
I’m familiar with the problem of sloped ceilings, as my house has the same challenge. I really like how clearly you phrased your question; it’s obvious you’ve already put a lot of thought into it.
Personally, I used the standard Metod cabinets at the bottom and then filled the gap between the cabinet and ceiling with custom-made triangular wooden boxes. This way, the storage is stable and the space is used efficiently.
For the slope, I later trimmed the side panels with a miter saw so they fit perfectly. It was a bit of extra work, but the result is excellent.
Maybe this could be an approach for you: standard cabinets plus custom covers. What is the approximate angle of your slope?
I’m familiar with the problem of sloped ceilings, as my house has the same challenge. I really like how clearly you phrased your question; it’s obvious you’ve already put a lot of thought into it.
Personally, I used the standard Metod cabinets at the bottom and then filled the gap between the cabinet and ceiling with custom-made triangular wooden boxes. This way, the storage is stable and the space is used efficiently.
For the slope, I later trimmed the side panels with a miter saw so they fit perfectly. It was a bit of extra work, but the result is excellent.
Maybe this could be an approach for you: standard cabinets plus custom covers. What is the approximate angle of your slope?
Hey Tinkar,
great topic! Sloped ceilings can be quite tricky when it comes to building a cool cabinet 😄.
What I often see and have tried myself are these cool “half-height” cabinets, like combining a base cabinet with an open shelf or a rack above it that then follows the slope. This keeps everything airy and visually uncluttered.
You can also work with slanted panels from IKEA – they are intended for other uses, but if you cut them to size, you can create some great custom adjustments.
I think less is more with sloped ceilings: better to have smart solutions that save space. Good luck and keep us updated! 😉
great topic! Sloped ceilings can be quite tricky when it comes to building a cool cabinet 😄.
What I often see and have tried myself are these cool “half-height” cabinets, like combining a base cabinet with an open shelf or a rack above it that then follows the slope. This keeps everything airy and visually uncluttered.
You can also work with slanted panels from IKEA – they are intended for other uses, but if you cut them to size, you can create some great custom adjustments.
I think less is more with sloped ceilings: better to have smart solutions that save space. Good luck and keep us updated! 😉
Interesting post, Joe52.
That is certainly a proven approach, but I would check the stability. Could this create weak points because the angle is not structurally optimal?
Does anyone have experience with whether additional reinforcements, such as angle brackets or sturdy profiles, have been useful? This could help distribute the weight more evenly and stabilize the slant connection.
Joe52 schrieb:
For the slant, I later adjusted the side walls with a miter saw to ensure a precise fit.
That is certainly a proven approach, but I would check the stability. Could this create weak points because the angle is not structurally optimal?
Does anyone have experience with whether additional reinforcements, such as angle brackets or sturdy profiles, have been useful? This could help distribute the weight more evenly and stabilize the slant connection.
I can relate to your thoughts, Tinkar. A kitchen with sloped ceilings can be really frustrating when you can’t find solutions that fit well and remain affordable.
I have used skirting boards extensively, which were then customized. This creates a neat finishing strip under the slope that also looks visually calm. Additionally, you can simply adjust the cabinets to the lower edges without having to work millimeter-perfect, which can drive you crazy.
Yes, I have done that when the cabinets are very long or hold heavy appliances – it never hurts and provides peace of mind during use.
I have used skirting boards extensively, which were then customized. This creates a neat finishing strip under the slope that also looks visually calm. Additionally, you can simply adjust the cabinets to the lower edges without having to work millimeter-perfect, which can drive you crazy.
Natan schrieb:
Does anyone here have experience with additional reinforcements, such as angle brackets or sturdy profiles?
Yes, I have done that when the cabinets are very long or hold heavy appliances – it never hurts and provides peace of mind during use.
Similar topics