ᐅ Are there specific hinges designed for IKEA Platsa doors?

Hello everyone,

I have a question that has been on my mind lately: Are there special hinges specifically designed or recommended for the doors of the IKEA Platsa system? In my project for a wardrobe with Platsa components, I noticed that the IKEA doors are built somewhat differently than those of other systems, so I wonder if it’s better to use certain hinges to ensure optimal functionality and durability.

I am particularly interested in whether there are official or unofficial recommendations for specific hinge models that fit better or are easier to install.

Thanks in advance for your advice!

Hello ben39,

Good question! The Platsa system from IKEA actually uses somewhat different doors compared to other cabinet lines. Officially, IKEA usually supplies the system with the matching hinges, which are designed to fit the door thickness and material. These are mostly concealed hinges specifically made for the thinner Platsa doors.

If you take the complete set, the correct hinges are usually included. If you want to buy replacement hinges or add more later, it is advisable to use the original IKEA hinges because the drilling holes and mounting points fit exactly.

Alternatively, you can use standard concealed hinges, but installation often becomes more complicated, and this can lead to gaps or alignment issues.

If you have any further questions about the installation, I’m happy to help!

There are special hinges for Platsa. It is best to use the folding hinges recommended by IKEA. Others usually do not fit perfectly because Platsa doors are thinner.

The doors of the IKEA Platsa system differ in door thickness and hinge mounting compared to other IKEA series. IKEA typically uses concealed hinges with a specific drilling depth here.

Technical compatibility is crucial: standard hinge depths and drill hole spacing may vary, so standard hinges may not fit without modifications.

Therefore, it is advisable to either use the IKEA hinges supplied or pay very close attention to the measurements of the mounting plates and hinge depth when considering alternatives.

There are no officially offered alternative hinges from IKEA itself, only the matching original fastening components as part of the Platsa system.

Naomige schrieb:
If you take the complete set, the correct hinges are usually included.

Thank you for the quick response. Knowing that the original hinges fit perfectly is reassuring.

What about replacement hinges? In case one breaks or if you want to add more doors – do you have experience whether you can simply buy replacements from IKEA, or is it possible to use an alternative?

draleo schrieb:
Standard hinge depths and drilling distances may vary, so standard hinges might not fit without modifications.

That sounds like the replacement isn’t straightforward unless you measure precisely. Could there perhaps be a specific IKEA part that could be considered a universal replacement?

ben39 schrieb:
What about replacement hinges? If one breaks or if you want to add more doors – do you have any experience whether you can just buy them from IKEA, or can you use alternatives?

Yes, replacement fittings are usually available directly from IKEA and can be purchased separately. It is important to know the hinge item number, preferably from the assembly instructions or directly from the Platsa system.

Alternatives are only used if you want something special, like soft-close or stronger hinges, but then you need to pay attention to the dimensions. Otherwise, the IKEA hinges are the simplest solution.