Hello everyone, I am planning to equip my IKEA Hemnes shelves with LED strips to significantly improve the lighting in the living area. I especially want to focus on an easy installation that still looks neat and leaves no visible cables. Ideally, the solution would allow the LEDs to be mounted either inside on the shelf walls or along the outer edges. Does anyone have experience or tips on the best way to do this? What type of LED strips are suitable for this (e.g., 12V, dimmable, with remote control)? I am also interested in how to route the power supply discreetly without having to make major modifications to the furniture. Thanks in advance for any helpful advice!
For installing LED strips in Hemnes shelves, I recommend the following approach: - Use LED strips with 12-volt direct current, as these are safe and standardized. - Choose dimmable models if adjustable brightness is desired. - Wiring can be neatly concealed behind the shelf board or along the back panel using cable ducts. - If the shelf is mounted to the wall, you can route the power cable through the base area to an electrical outlet. - For a clean look, warm white LEDs are recommended, as they complement wooden furniture better.
jaanda schrieb:
- Use LED strips with 12-volt direct current, as these are safe and standardized. Thanks, that sounds good so far. What about the connection and control? I want to avoid cable clutter as much as possible, maybe with a wireless remote control or app control. What would you recommend? Do I need to buy special controllers for that, or are there LED kits that already include everything?
Many LED strip sets now come with integrated controllers, including remote controls or Wi-Fi modules for app control. Make sure the power supply has sufficient capacity and matches the LED strip. If you want a wireless remote control, RGB or tunable white LEDs are a good choice, even though they are somewhat more expensive. Otherwise, simple warm white 12V LED strips work well with a suitable dimmer.
I equipped my Hemnes shelf with LED strips and was initially skeptical about whether it would work without causing any damage. Honestly, I was surprised at how straightforward the installation was. I attached the LEDs inside at the back panel of the shelf and secured the power cable on the back using cable ties. The standard 12V LED strip with a remote control was perfect for me—no complicated controllers needed. Just a tip: it’s best to drill the hole for the cable in a hidden spot to keep the wiring concealed. The result is very harmonious, and the warm light really makes a difference. If you want, I’m happy to help with the details.
Similar topics