Hello everyone,
I am planning to move soon and own some Malm furniture from Ikea that I want to transport safely. My question is: How can I better secure Malm furniture during a move to prevent scratches and avoid compromising its stability? Specifically, I am interested in proven methods, packaging materials, and procedures that both protect the furniture and make the transport easier. Additionally, I am concerned about any drawers and the smooth surface that can scratch easily. I look forward to your tips and experiences!
I am planning to move soon and own some Malm furniture from Ikea that I want to transport safely. My question is: How can I better secure Malm furniture during a move to prevent scratches and avoid compromising its stability? Specifically, I am interested in proven methods, packaging materials, and procedures that both protect the furniture and make the transport easier. Additionally, I am concerned about any drawers and the smooth surface that can scratch easily. I look forward to your tips and experiences!
For securely protecting Malm furniture during a move, I generally recommend the following approach:
1. Completely empty all drawers to avoid unnecessary weight.
2. For drawers that can be securely locked, you can either remove them and pack them separately or firmly secure them, for example with stretch wrap or packing tape, to prevent them from opening during transport.
3. To avoid scratches on the surface, use appropriate padding materials such as bubble wrap or furniture blankets.
4. Pay special attention to corners and edges, as these are particularly vulnerable during transport.
5. For the transport itself, ensure secure positioning in the vehicle, for example lying on a padded surface or standing upright with straps, depending on the piece of furniture and the transport method.
In general, careful packing and the use of good quality packing materials are essential.
1. Completely empty all drawers to avoid unnecessary weight.
2. For drawers that can be securely locked, you can either remove them and pack them separately or firmly secure them, for example with stretch wrap or packing tape, to prevent them from opening during transport.
3. To avoid scratches on the surface, use appropriate padding materials such as bubble wrap or furniture blankets.
4. Pay special attention to corners and edges, as these are particularly vulnerable during transport.
5. For the transport itself, ensure secure positioning in the vehicle, for example lying on a padded surface or standing upright with straps, depending on the piece of furniture and the transport method.
In general, careful packing and the use of good quality packing materials are essential.
J
JULIANNALO29 Sep 2020 11:12Always empty drawers and pack them individually. It is best to wrap furniture with blankets and secure them with plastic wrap. Protect edges with foam padding.
There are some special considerations to keep in mind with Malm furniture, especially since the surfaces are usually lacquered and not comparable to solid wood. To prevent scratches and dents, I recommend the following in detail:
- First, completely empty the drawers. I would remove them from the frame, as they can be more easily and safely padded as separate parts during transport. Pay attention to the slides, as they can be easily damaged, so protect them well.
- Cover the surface with a thin layer of bubble wrap, but be careful: avoid directly sticking tape onto the surface, as this can damage the lacquer. It’s better to use moving blankets or loosely cover the furniture with the bubble wrap, then wrap it with stretch film.
- Protect the edges with edge or foam profiles, which come in various thicknesses. Corners are especially vulnerable.
- For the transport itself, never place the furniture board on hard, rigid surfaces—ideally use moving blankets or sturdy mattress pads.
- To secure the furniture inside the moving vehicle, use ratchet straps fixed so that the pieces cannot shift. Be careful not to tighten the straps too much, as this could cause cracks in the panels.
- You should also consider whether to transport the furniture standing or lying down. Transporting it standing is gentler, but for the Malm wardrobe, lying down can sometimes be more practical, especially when the drawers have been removed.
How large are the furniture pieces, and how do you plan to transport them? This will further influence the best approach.
- First, completely empty the drawers. I would remove them from the frame, as they can be more easily and safely padded as separate parts during transport. Pay attention to the slides, as they can be easily damaged, so protect them well.
- Cover the surface with a thin layer of bubble wrap, but be careful: avoid directly sticking tape onto the surface, as this can damage the lacquer. It’s better to use moving blankets or loosely cover the furniture with the bubble wrap, then wrap it with stretch film.
- Protect the edges with edge or foam profiles, which come in various thicknesses. Corners are especially vulnerable.
- For the transport itself, never place the furniture board on hard, rigid surfaces—ideally use moving blankets or sturdy mattress pads.
- To secure the furniture inside the moving vehicle, use ratchet straps fixed so that the pieces cannot shift. Be careful not to tighten the straps too much, as this could cause cracks in the panels.
- You should also consider whether to transport the furniture standing or lying down. Transporting it standing is gentler, but for the Malm wardrobe, lying down can sometimes be more practical, especially when the drawers have been removed.
How large are the furniture pieces, and how do you plan to transport them? This will further influence the best approach.
Laukau5 schrieb:
How large are the pieces of furniture, and how do you plan to transport them?Thank you for the detailed answer! Most of the furniture pieces are dressers about 2 meters (6.5 feet) tall and cabinets about 1.5 meters (5 feet) wide. I will transport them standing up in a medium-sized moving truck (around 3.5 tons), since the depth of the furniture fits that way. I haven’t installed any fixed padding yet. I will remove all the drawers completely. Is it enough to wrap the drawers in blankets?
In your case, you should definitely wrap the drawers separately and with good padding. Blankets are suitable, but adding bubble wrap inside would be ideal, as blankets alone do not provide enough protection against shocks.
For the furniture itself, I recommend using not only blankets but also stretch film to secure the blankets firmly and prevent scratches from friction. Ratchet straps in the cargo area will secure the furniture against shifting.
Make sure not to place the furniture directly against hard surfaces such as metal walls, but create some distance using padding.
Drawers can also be secured during transport without removal by using duct tape or Velcro straps, but separate packaging is usually safer.
For the furniture itself, I recommend using not only blankets but also stretch film to secure the blankets firmly and prevent scratches from friction. Ratchet straps in the cargo area will secure the furniture against shifting.
Make sure not to place the furniture directly against hard surfaces such as metal walls, but create some distance using padding.
Drawers can also be secured during transport without removal by using duct tape or Velcro straps, but separate packaging is usually safer.
Similar topics