ᐅ What are some tips for carefully disassembling and reassembling IKEA BESTA furniture during a move?

Hello everyone, I am about to move and own some IKEA Besta furniture that I want to disassemble as carefully as possible and reassemble later. Therefore, my question to you is: What tips and tricks do you have for safely taking apart Besta furniture during a move, especially regarding the fasteners and delicate surfaces? Are there proven methods or tools that also make the reassembly easier? I want to avoid screws or dowels breaking and prevent the furniture from becoming wobbly or damaged later on. I look forward to your practical advice and experiences!

It is important to systematically loosen all screws before disassembly and to place the small parts in labeled containers.

When dismantling, carefully remove the furniture components and avoid using force, especially on the connectors.

To protect the surfaces, old blankets or moving blankets are helpful. Use a screwdriver with the appropriate bit.

For clarification:

- Before disassembly, it is advisable to have the assembly instructions ready or, if no longer available, save them online as a PDF.
- The fasteners of the BESTA series are primarily cam locks and dowel connections. Carefully unlock these without damaging the cam plates, as they will not hold properly during reassembly otherwise.
- It is recommended to sort the screws by length and application to avoid mistakes during later reassembly.
- The surfaces are sensitive; protecting them with moving blankets or bubble wrap is especially effective in preventing scratches or abrasions during transport.
- Bring tools with both Phillips and flathead attachments, as some screws are non-standard.

This approach minimizes the risk of damage and significantly simplifies reinstallation.

Juan31 schrieb:
It is advisable to sort screws by length and intended use to avoid mistakes during the later assembly.

I can absolutely confirm that! It’s best to label the small bags with screws and boards, which will save you a lot of stress when putting everything back together later.

memiriam schrieb:
When disassembling, carefully remove the furniture parts and avoid using force, especially on the connectors.

Even better: Mark the positions of connectors and dowels with a pencil to avoid any guesswork.

Oh, and a quick tip from me: when removing the back panels, carefully pry them off using a small screwdriver or a putty knife—this often prevents unnecessary damage.

A bit of patience pays off here, so your good piece stays stable and looking nice even after the move!