ᐅ What should I pay special attention to when assembling BILLY shelves?
Created on: 8 Aug 2019 14:22
E
emilema
Hello everyone, I am currently planning to assemble some Billy bookcases from IKEA and have a specific question: What should I particularly pay attention to during assembly to ensure optimal stability and durability? I am especially interested in the best way to secure the bookcases to the wall, if there are any special considerations when installing the back panel, and if there are any tips for dealing with uneven flooring. I would also appreciate any advice on common mistakes to avoid or recommended tools.
emilema schrieb:
Is it better to screw the entire back panel in place, or are just a few points enough for fixing? For maximum stability, it is recommended to attach the back panel with as many screws as specified. Sometimes a few screws might be sufficient, but this increases the risk of twisting and reduces resistance to tipping. The back panel acts as a cross brace, so it must be fixed flat and tightly.
P
pautanner9 Aug 2019 11:50I fully agree with
letar schrieb:. This significantly enhances the overall sense of solidity. And yes, a shelf will last longer when it is properly secured. 🙂
for maximum stability, it is recommended to attach the back panel with as many screws as specified
I see, so it's better to play it safe and secure the back panel completely with the recommended screws. One thing I'm still unsure about: Do you have any tips for securely mounting shelves on old walls with crumbling plaster? Are there any special anchors or mounting materials you would recommend?
For old walls with crumbling plaster, it is important to anchor the fasteners in the load-bearing layer behind the plaster. Hollow wall anchors or heavy-duty anchors are best suited for this purpose. Metal anchors such as expanding metal anchors or metal-bodied wall plugs are recommended. It is essential to thoroughly clean out the drill hole to ensure the anchor holds properly. For very weak walls, using a backing plate to distribute the load can provide additional stability.
Alternatively, for particularly challenging substrates, installation with chemical anchors can provide a stable solution. This involves injecting a special resin into the drilled hole, into which the screw is then inserted. This method is especially suitable for crumbly or porous areas but requires precise work. Otherwise, as mentioned, steel expansion anchors are a good choice for older masonry.
Similar topics