Hello everyone,
I recently noticed that some parts of the drawers on my Malm dresser, especially the side panels and a few runners, have minor damage. Since I don’t want to buy a completely new dresser, I would like to know how to properly replace these damaged parts of the Malm drawers without having to take the entire dresser apart.
I’m particularly interested in how to best remove the parts and whether there are specific replacement parts from Ikea that can be ordered online. It would also be helpful to know what to watch out for during disassembly and reassembly to ensure the drawers run smoothly and remain stable afterward.
Does anyone have experience with the Malm system or could explain step-by-step how to make this replacement as simple as possible? Thanks in advance for your tips!
I recently noticed that some parts of the drawers on my Malm dresser, especially the side panels and a few runners, have minor damage. Since I don’t want to buy a completely new dresser, I would like to know how to properly replace these damaged parts of the Malm drawers without having to take the entire dresser apart.
I’m particularly interested in how to best remove the parts and whether there are specific replacement parts from Ikea that can be ordered online. It would also be helpful to know what to watch out for during disassembly and reassembly to ensure the drawers run smoothly and remain stable afterward.
Does anyone have experience with the Malm system or could explain step-by-step how to make this replacement as simple as possible? Thanks in advance for your tips!
tunar54 schrieb:
how to best remove the parts and whether there are special replacement parts from IkeaYou can get replacement parts directly from Ikea; often you can order parts online or inquire at an Ikea replacement parts store.
For removal: fully pull out the drawer, detach the side panels (usually secured with screws or clips), remove the old parts, and install the new ones. Be careful with the runners – they can normally be unscrewed as well.
Hello tunar54,
I can understand your situation well, as I have had to replace parts in my Malm dresser several times myself.
In general, I recommend first removing the drawer completely and placing it on a flat surface. This way, you can carefully inspect the damaged side panels and slides before dismantling them.
This is important because most slides are attached with small screws. Make sure to keep all screws and, if necessary, note the order of the individual parts. If you order parts directly from Ikea, it might take a few days for them to arrive, so plan accordingly.
If you can’t find the components anymore, it’s sometimes worth checking online marketplaces or the Ikea website under replacement parts.
For installation: check that the new parts have exactly the same size and shape as the old ones—otherwise, you might have fitting problems. Once everything is installed, simply slide the drawer back into the rails and carefully test whether it moves smoothly.
I hope this helps! 🙂
I can understand your situation well, as I have had to replace parts in my Malm dresser several times myself.
In general, I recommend first removing the drawer completely and placing it on a flat surface. This way, you can carefully inspect the damaged side panels and slides before dismantling them.
jokau schrieb:
Be careful with the slides – they can usually be unscrewed.
This is important because most slides are attached with small screws. Make sure to keep all screws and, if necessary, note the order of the individual parts. If you order parts directly from Ikea, it might take a few days for them to arrive, so plan accordingly.
If you can’t find the components anymore, it’s sometimes worth checking online marketplaces or the Ikea website under replacement parts.
For installation: check that the new parts have exactly the same size and shape as the old ones—otherwise, you might have fitting problems. Once everything is installed, simply slide the drawer back into the rails and carefully test whether it moves smoothly.
I hope this helps! 🙂
Thanks for the quick responses so far!
That makes sense. I just wanted to confirm whether it’s absolutely necessary to remove the drawer front to access the side panels, or if they’re usually accessible from the back.
Also, I’m wondering if it’s better to replace a damaged set of drawer slides completely or if repairing them with spare parts is sufficient, and whether there are quality differences to consider.
If anyone has personal experience or tips, I’d appreciate your input…
Katau schrieb:
Make sure to keep all screws and, if needed, note the order of the individual parts
That makes sense. I just wanted to confirm whether it’s absolutely necessary to remove the drawer front to access the side panels, or if they’re usually accessible from the back.
Also, I’m wondering if it’s better to replace a damaged set of drawer slides completely or if repairing them with spare parts is sufficient, and whether there are quality differences to consider.
If anyone has personal experience or tips, I’d appreciate your input…
tunar54 schrieb:
whether I absolutely have to remove the drawer frontFor Malm drawers, it is usually not necessary to remove the front to access the side panels. The side panels can often be detached by pulling out the drawer and removing the screws.
Regarding the slides: It is generally worth replacing the entire set of rails if they are damaged, since worn parts can affect the function and stability of the drawer. Original Ikea parts are recommended here, as they are precisely matched to the system.
When installing, it is important to align the slides exactly parallel; otherwise, the drawer may stick or be difficult to operate. A bit of patience during installation pays off.
Similar topics