ᐅ What are the common causes of squeaking in MALM beds?

Some time ago, I bought a Malm bed, and I noticed that it squeaks repeatedly, especially when I move or turn over. My specific question is: What causes squeaking in Malm beds? I have already checked that all the screws are tight, but the noise persists. Could it be related to the choice of materials, the construction, or the assembly? I would like to understand which factors influence this typical noise development in order to potentially find a solution.

The squeaking noise in the MALM bed is often caused by loose screws or poorly lubricated joints. Check all screws, tighten them, and apply a suitable lubricant to the connection points.

Squeaking in MALM beds often results from friction between wooden parts or between wood and metal at the connection points. MALM beds are mainly made of particleboard with a foil finish, which may not be optimally joined in certain areas when moved. Additionally, temperature fluctuations and humidity can cause the material to expand slightly, loosening the connections and causing noise. The assembly instructions recommend regularly tightening all screws and lubricating the connecting parts.

I can totally relate – who wants to lie in bed at night and hear it start playing its own symphony? 🙂 In my experience, the squeaking often comes from tiny movements at the joints, especially when the screws aren’t tightened very firmly or when the wood naturally expands and contracts. Sometimes using felt pads or small pieces of fabric at contact points helps reduce the friction. Give it a try!

The noise can be really annoying. I think it’s important not to get discouraged right away and to systematically determine whether it’s caused by the installation or the material. I had a MALM bed myself that squeaked until I realized that a warped slatted bed base was the cause. Sometimes small misalignments create pressure points that lead to noises. Try to align all parts precisely and check the fit.

LUISABEL schrieb:
Temperature fluctuations and humidity cause the material to expand slightly

That may be true, but I would question how significant these effects actually are. Particle boards and foil coatings are usually quite resistant to moisture. In my opinion, the mechanical construction is more likely the main issue, such as fit between components or poor fasteners. Is there any evidence that climate is the primary cause of squeaking?